Engineering MIX Audio Mixer []Radial 21 2-channel

We offer a wide variety of products, and the following precautions apply to some of them. Please note that they are listed for all products. 【Voltage Compatibility】Designed for Japanese voltage (90-110V). Using with a different voltage may cause malfunction. 【Plug Type】Japanese plugs (A or B type). Use a conversion adapter if needed. 【Transformers & Adapters】Transformers adjust voltage; adapters only change plug shape. Using an adapter without a transformer may damage the product. 【Liability】We are not responsible for damages caused by improper use, such as using the product without a transformer. Mix 2 channels of signal to 1 channel mono output Level control for each input can be bypassed Input terminals are 1/4 inch TRS phone, XLR Completely passive design, no power supply required MIX 2:1 is a convenient mixer that mixes two audio signals into one output. This allows you to easily mix the stereo output of a console, audio interface, or portable player to mono, as well as adjust the balance of the two signals being mixed. The MIX 2:1 inputs include 1/4" TRS phone and XLR connectors, and these inputs use ground lift switches to eliminate noise caused by ground loops. If you connect two separate mono sources, you can adjust their levels as needed. You can also completely bypass both level controls and mix inputs 1 and 2 at the same level to avoid unnecessary level adjustments. After mixing the two signals using a passive circuit, connect them to the inputs of powered speakers, mixing consoles, and audio interfaces. The MIX 2:1 uses a 14-gauge steel I-beam inner frame and a unique bookend-shaped outer shell to withstand the rigors of live touring. This design removes stress on the PCB, stabilizes the solder joints, and provides protection for the switch and terminals through the outer shell.