3D Printer Control Board for MKS Gen L V1.0 Integrate Ramps Motherboard Support 12/24V Input Power

Description:

Item type:tool

2560 and ramps1.4 are integrated on a piece of board, which solves the problem of complicated and easy failure for Ramps1.4 composite interface. Users can change their own motor drive, support 4988 drive and 8825 drive, TMC2100 drive. Using CH340 serial chip to ensure the stable and reliable premise, reduce the cost, and to solve the problem of the previous 16U2 hard drive. 24V input can be accepted, and the same system power can reduce the hot bed current to 1/4, effectively solving the hot bed MOS tube heating problem. The external drive signal is reserved, and the 57 or 86 motor can be driven by a large external drive. Using the open source firmware for Marlin, the configuration is exactly the same as for ramps1.4, and can replace for Ramps1.4 directly. It can be directly connected to 2004LCD display and 12864LCD display, and can be supported by TFT28 and TFT32 touch screen. The XYZ axis adopts the terminals of different colors to correspond to the motor and the limit switch, and the connection is convenient. The humanized design uses different color terminals to distinguish the driving direction, reduces the probability of inserting and reversing, and prevents the main board from being damage by the oppsite inserted of the drive.

Packing list:

1 x MKS Gen-L V1.0 Integrated Controller Motherboard 1 x USB Cable

Note: due to different personal displays, light and contrast differences, there may be slight color difference between the picture and the real object.