• Customize 24V exclusive 16LED 8-sided crystal cut truck side marker set of 4
• Size: Width: Approx. 90mm / Height: Approx. 79mm
• Number of LED elements: 16LED
• Applicable voltage: 24V Current: 0.4A (1 piece) Power consumption: 10W (1 piece) Brightness: 270lm
• *About waterproofing. In rare cases, the plating ring may shift slightly diagonally due to the screwing angle of the lock screw, and the waterproofness of the rubber ring may not be maintained. In that case, please remove the lock screw, remove the plated ring, and then tighten it again so that the plated ring does not become slanted. In rare cases, when screwing in the lock screw, the plated ring may shift diagonally. In that case, please tighten the plated ring firmly and do not use lock screws.
Customize 24V Truck LED Marker Lamp Side Marker 8-sided Crystal Cut Specification 16LED General Purpose Set of 4 Blue / Yellow / Red / White / Green / Amber / Pink / Ice Blue / Purple Various Colors
・Set contents: Marker lamp x 4 (set of 4)
・Number of LED elements: 16SMD
・Applicable voltage: 24V
・Current: 0.4A (1 piece)
・Power consumption: 10W (1 piece)
・ Brightness: 270lm
・Size: Width: Approx. 90mm / Height: Approx. 79mm
Eye-catching side markers with colored crystal-like lenses
Adopts 24V LED! It consumes less power and is bright!
The glittering marker body is made of our original 8-sided crystal cut specification, which gives it a sparkle that can be achieved.
Since only high-quality PP materials are used, the clarity is obvious compared to cheaper markers! !
The frame of the marker is made of high-quality chrome plating for a fearless shine.
The reflective plate is also given a mirror-like finish to enhance its shine from the stage of making the mold.
Our original 8-sided tinted lens provides clear colors and a fantastic shine!
Eye-catching side markers with colored crystal-like lenses. Enhance your design with crystal-like lenses!
High-brightness SMD is used for the light emitting part to ensure sufficient brightness.
Tightly incorporates a stabilizing resistor to maintain constant voltage and prevent LED burnout, protecting the lifespan of the LED.
Cheap marker lamps do not have enough built-in ballasts and cannot adequately control the voltage, so although they will light up, the lifespan of the LED will be very short.
*About waterproofing
In rare cases, the plating ring may shift slightly diagonally due to the screwing angle of the lock screw, and the waterproofness of the rubber ring may not be maintained.
In that case, first remove the lock screw, remove the plated ring, and then tighten it again so that the plated ring is not tilted.
In rare cases, when screwing in the lock screw, the plated ring may shift diagonally. In that case, please tighten the plated ring firmly and do not use lock screws.
No-delivery refund
