MYmama Embossing Heater, 2-Level Switch, Compact Heat Gun, Bubble Removal, for Resin (Original Color)

Product Specifications: AC: 100-120V, W: 300W, Hz: 50-60Hz Size: Unit: Length approx. 22.5cm x Diameter approx. 4.5cm (max), Cord Length approx. 1.9m Weight: Approx. 246g (including power cord) ■Temperature: Approx. 130°C (low), 260°C (high) ■Shell Material: ABS Resin - Bent or scratched packaging is unavoidable. - Packaging is delivered wrapped around the outer box without wrapping the corners. Crushed, bent, or dirty outer boxes are not considered defective. Please read the enclosed instruction manual carefully before use and use correctly. Also, please keep the outer box and do not discard it. Please be aware of the above before purchasing. Caution: - A small amount of smoke may be generated during initial use. This is due to the oil used during production. The smoke will dissipate quickly. (Please understand that this is not a defect.) - Always use with 100V power. (Only available in Japan) - This is not a hair dryer. Never point it at people. - Do not use for anything other than craft purposes. - Do not use near flammable or combustible materials. - After use, turn the switch OFF and unplug the product from the outlet. - Take care not to get it wet. - Keep out of reach of small children. Do not let children use it alone. - The outlet becomes very hot, so do not cover it with your hand or a cloth. - After use, allow it to cool completely before storing it. - Do not use for more than 10 minutes continuously.