Battery Jump Cable Car Battery Clip 480G Alligator Clip Battery Cord Emergency Jump Starter Car With Firewire 500A Cable Clamps

Name: Car battery wire with live wire Specification: 500A/2.2m Wire diameter: 8mm wire diameter Material: Copper Clad Aluminum Length: 2.2meters Applicable models: most car series Parts List: Firewire*2 (one black and one red) The connection procedure is as follows: (1) First, clamp the red wire of the starting cable on the positive pole of the red battery of the "rescued car". (2) Then clamp the red wire at the other end to the positive pole of the red battery of the "rescue vehicle". (3) Clamp the black wire on the black negative battery of the "rescued". (4) Then clamp the black wire on the black negative battery of the "rescue vehicle". (5) Start the engine of the "rescue vehicle" first, and then start the engine of the "rescue vehicle". If you find that the rescued vehicle still cannot be started, please check whether the metal contact part is in poor contact. After starting the engine, you still need to remove the starting wire in order, otherwise it may cause a short circuit.

The procedure for removing the line is as follows: (1) Remove the black wire of "Rescued". (2) Remove the black wire of the "rescue vehicle" again. (3) Then remove the red wire of the "rescue vehicle". (4) Finally, remove the red wire of the "distressed vehicle". How to use: The battery wiring can be bought in the auto parts market. The battery wiring is generally black and red, which are mainly used to distinguish the positive electrode and the negative electrode. There is no need to start the vehicle with electricity during the ride. You only need to connect the batteries of the two cars in parallel. The red wire is connected to the positive electrode of the battery of the two cars, and the black wire is connected to the negative electrode of the battery of the two cars, and then it can be started. The vehicle is out.