[Product Description]
Designed specifically for NiMH / NiCD batteries. The charging current can be selected between 1A and 2A, allowing for rapid charging at the high power mode of 2A. Compatible with batteries for RC cars, RC boats, airsoft guns, and some drone batteries. Suitable for a wide range of nickel-metal hydride batteries beyond the typical 7.2V and 8.4V voltages.
*In survival games, due to internal design, there is a limit to the power output during firing. However, charging at higher amperage (2A) helps maintain higher battery voltage (power) for a longer period, making power drops less noticeable. Note that using higher current consumes battery power faster, which may slightly reduce overall usage time.
Specifications:
Compatible Batteries: NiMH / NiCd 2.4V-7.1V, 8.4V, 9.6V packs
Connector Compatibility: Compatible with Mini Tamiya and Standard Tamiya (Tokyo Marui compatible). Please prepare a conversion connector for other types. Includes alligator clip adapters for special terminals.
Number of Cells Supported: 2-8 cells
Input Voltage: 100-240V AC
Charging Current: Max. 2A
Charging Indicator: Power ON: Green LED, Charging: Red, Complete: Green, Error: Flashing Red, Unrecognized Battery: Alternating Green and Red, Power Supply Issue: Red Flashing (when connected to a sufficiently charged battery)
Package Contents: Standard Tamiya connector battery charger, Mini Tamiya conversion cable, Alligator clip conversion adapter
✅【High Power Mode!】Switchable charging current between 1A and 2A. Charging at higher current (2A) delivers more power, which affects projectile speed and distance in survival games, and top speed and acceleration in RC cars. For longer battery life, use 1A.
✅【Usage & Compatible Batteries】Recommended for first-time users of NiMH batteries in survival games and radio-controlled cars. Supports typical 7.2V and 8.4V batteries, as well as NiMH and NiCd batteries with 2 to 8 cells (2.4V to 9.6V). This newly designed, easy-to-operate, lightweight, and compact AC charger does not have a discharge function. Note: 1S (single cell) batteries are not supported. No manual included; please refer to this product description for usage instructions.
✅【Power Supply】AC 100V (PSE compliant)
✅【Charging Current】Switchable between 1A and 2A with manual switch, auto cut-off with delta peak detection, output power 20W
✅【Battery Compatibility】NiMH and NiCd batteries with 2-8S (2.4-9.6V)
✅【Connection】Includes standard Tamiya connector and a conversion cable for Mini Tamiya. The N8 charger also includes an alligator clip conversion cable.
✅【Easy-to-Read Indicators】LED indicators show four states: no battery, charging, complete, and error. Simply connect to power and then connect the charger directly to the battery to start charging in two steps. Red LED during charging, green LED when complete.
✅【Safety Features】Includes reverse polarity protection, overvoltage protection, overvoltage detection, reverse connection protection, and short circuit prevention, comparable to higher-end models.
✅30-day initial defect warranty and one-year repair support (may include paid replacement). If you suspect a malfunction, please contact the retailer first.
[Important Notice - For Overseas Customers]
Thank you for purchasing this product. Before using it overseas, please carefully read the following important notices.
1. Laws, Regulations, and Safety Standards
This product complies with Japanese safety standards. Before use in your country, please check its compliance with local laws, regulations, and safety standards.
Certain product categories (electronics, cosmetics, food, etc.) may require certification in the importing country.
2. Regarding Electrical Products
【Voltage Compatibility】
When using electrical products, please note that they are designed to match Japanese voltage specifications (90-110V). Using them with a different voltage may cause malfunction.
【Plug Type】
Our products use Japanese plug types (Type A or Type B).
Please use a conversion adapter as needed.
【Important Notes Regarding Transformers and Adapters】
Transformers adjust the voltage to match the requirements of the equipment.
Conversion adapters only change the plug shape and do not adjust the voltage.
Using only a conversion adapter without a transformer may damage the product.
[Regarding Liability]
We are not responsible for any malfunctions or damage caused by improper use, such as operating the product without a transformer.
3. Language and Manual
Product instructions and displays may be in Japanese only.
An English version of the manual can be downloaded from our website.
4. Regarding Product Returns and Exchanges
Please note that if you wish to return or exchange a product, you will be required to submit a video of the unpacking process.
No-delivery refund
