Joby Weivo POD WAVO POD YouTuber Vlogger USB Microphone Connects To PC Via USB Cable Switches Between Unidirectional and Bidirectional Patterns with

【Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction. 【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary. 【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product. 【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer. [Easy to use, plug-and-play even for beginners] This USB microphone features a large diaphragm, making it ideal for voice capture. It's plug-and-play; simply connect it to your computer with the USB cable to start using it immediately. The design is user-friendly, allowing you to unconsciously face the diaphragm at the correct angle. A pop filter is included as standard to prevent plosive noise and ensure clear sound quality. [Switching Directional Patterns with a Single Button] You can easily switch between unidirectional mode, which picks up almost no sound from behind the microphone, and bidirectional mode, which picks up sound from both the front and back of the microphone, with a single button. Bidirectional mode is suitable for conversations between two people or face-to-face interviews, and a separately sold pop filter is available for the rear diaphragm. [Abundant Mounting Options] The desk base attached to the bottom of the U-shaped bracket can be removed and replaced with a GorillaPod stand, expanding the range of uses for the Weivo POD. Both sides of the U-shaped bracket are equipped with 1/4" JOBY link screws, allowing you to attach smartphones, lights, etc. via a GorillaPod arm. The bottom of the unit is equipped with a 3/8" screw hole, and a 5/8" adapter screw is also included, allowing you to attach it to commercially available arms. [Specifications] Dimensions: 10 x 10 x 24 cm (with U-shaped bracket, desk base, and pop filter attached) / Weight: 717 g / Transducer: Electret condenser / Polar Pattern: Unidirectional/Bidirectional / Frequency Response: 20 Hz - 20 kHz / Sensitivity: -36 dB (0 dB = 1 V/ Pa, 1 kHz) / Signal-to-Noise Ratio: 80 dB / Maximum Sound Pressure Level: 110 dB [Specifications] Sampling rate: 48kHz / Bit depth: 24bit / Plug: USB Type-C, 3.5mm headphone jack / Attachment: 3/8" screw (main unit), 1/4" screw, 3/8" screw (U-bracket) / Accessories: Pop filter, U-bracket, desk base, USB C-A cable (3m), USB C-C cable (2m)