4-in-1 anti-rust paint for metal, grey RAL7045 I SEE zinc steel 5L glossPROFESSIONAL METAL PROTECTION AND AESTHETIC FINISH IN ONE SEE Metal Paint 4-in-1 is a modern, water-based anti-corrosive paint designed for protecting and decorative painting of metal surfaces. The product can be applied directly to rust, without the need for an anti-corrosion primer. It creates a durable, flexible, and weather-resistant protective coating that effectively protects metal against corrosion, UV radiation, and daily use.
PRODUCT PARAMETERSBrand: I SEEPower: 5LColor: RAL7045Finish: GLOSSType: paint for metal directly on rust 4in1Efficiency: Approx. 40-60 m²/L with one coatRecommended number of coats: 2Application: brush, roller, traditional and hydrodynamic sprayApplication temperature: from +8°C to +30°CDrying time between coats: Approx. 30–60 minutesRain resistance: after ok. 6 hoursFull hardening: about 48 hours
WHY CHOOSE I SEE PAINT FOR METAL?✔ 4-in-1 – Multifunctional Metal ProtectionCombines the function of anti-corrosion protection, primer, protective layer, and decorative finishing coating.✔ Painting directly on rustThanks to its special formula, the product can be used on properly prepared surfaces with rust spots.✔ Weather resistanceThe paint maintains color fastness and resistance to rain, snow, moisture, and UV radiation.✔ High adhesion to the substrateExcellent adhesion also to demanding and smooth metal surfaces.✔ Flexible and durable coatingDoes not crack, peel, or delaminate and works well with the substrate.✔ Resistance to scratches and dirtThe coating exhibits increased mechanical resistance and is easier to keep clean.✔ For indoor and outdoor applicationsSuitable for both outside buildings and inside rooms.
APPLICATIONI SEE paint is ideal for painting:• metal fences• gates and wickets• railings and handrails• steel structures and sheds• metal doors• galvanized sheet metal elements• steel, cast iron and aluminum surfaces• agricultural and construction machinery, equipment and tools
ON WHAT SUBSTRATES?
The product is intended for painting surfaces:
✓ steel
✓ galvanized
✓ aluminum
✓ cast iron
✓ previously painted coatings (after appropriate preparation)
PERFORMANCE I SEE 4-in-1 metal paint is characterized by very good hiding power and high efficiency. Estimated efficiency with one coat:• 1L = ok. 8–12 m²• 2.5L = ok. 20–30 m²• 5L = ok. 40–60 m²On this auction, you are buying 5l of paint. Other capacities are available on other auctions in our store.Product consumption: approximately 80–150 ml/m² per coat. The actual coverage may vary depending on the type of substrate, its absorbency, degree of roughness, and application method. (brush, roller or spray). For complete anti-corrosion protection, applying 2 coats of paint is recommended.NATURAL PHENOMENON OF THE PRODUCTIn the paint, slight separation or a thin skin may appear on the surface. This is a natural process occurring in high-quality water-based products and does not affect the product's properties. Shake well before use to obtain a uniform consistency.
HOW TO PREPARE THE SUBSTRATE?
The substrate should be:
• stable and stable
• cleaned of dust and dirt
• defatted
• free from loose rust and flaking fragments of the old coating
No misunderstandings – important information about colorWhen buying paint online, remember that the color visible on the screen may differ slightly from the actual shade. Monitor settings, lighting, and the application method of the paint influence this.✅ Color test – perform a test on a small area before painting (Approx. 5 cm), to ensure the shade meets your expectations.✅ Color evaluation – evaluate the color only after it has completely dried, as it may temporarily change during drying.✅ Samples – for certainty, you can order a set of 2×150 ml samples (available on another auction).? Returns – if the color does not meet expectations, we accept returns in accordance with the regulations.
Below are all available colors of metal paint in our store in matte, semi-gloss, gloss, satin finishes:
No-delivery refund
