Infrared Human Body Induction Solar Circuit Board 3.7V Solar Lamp Board Control Sensor Night Light Module Controller Module

Description Rated battery voltage: 3.7V lithium battery 3.7V lithium battery with overcharge and overdischarge protection When connecting to a 3.2V battery, the battery comes with a protection plate Solar panel input power :Less than6V6W LED power :Less than3V5W Sensing mode: human infrared sensing Sensing distance: about 2-5 meters (depending on ambient temperature) Sensing time :25 seconds Three lighting modes: 1. Induction highlight , light 2. Induction highlighting , Off indicator 3. Light control long bright After the first power, it is the 1st gear mode, short press to switch to another gear, short press the third button to shut down. You need to hold the switch for 3 seconds to turn it on again. Do not turn off the switch when the sun is charging, the switch needs to be in the normal state to charge. Place the white lens cover over the sensor during testing or after installation. Specifications: Material: ABS Packaging: 1 Set Size: As picture Note: 1. Color difference explanation (Due to differences in shooting lighting, background, and monitor, color difference is difficult to avoid. We have adjusted the color difference to the minimum range, and the actual product color shall prevail) 2. Allowable range for manual measurement of size (this range is rationalized based on product size)

Note: 1.Due to manual measurement, please allow an error of 1-2cm. Please make sure you don't mind before bidding. 2.Due to the differences between different monitors, the picture may not reflect the actual color of the project. Thank you! The merchant warrants that their products comply with all applicable laws, and are offered only if they comply with Joom's policies and EU Product Safety and Compliance laws.