Feature:
The water flow sensor is applied for water heater, imprinter, automatic water machine, and other flow metering equipment.
With stainless steel ball inside of the impeller, wear-proof
Up and down structure stress applied for the seal , avoid to leak
with imported Hall element, and adopt pouring sealant encapsulation to avoid to leak and age
Install vertically, angle of inclination should not be exceeded 5 degree
Medium temperature should not be exceeded 120degree
Wiring:
Red - In - Connect positive
Yellow - Out - Signal output
Black - GND - Connect negative
Technical Parameters:
Working range: 0.3-6L/min
Water pressure: ≤0.8MPa
Minimum rated working voltage: DC4.5 5V-24V
Maximum working current: 15 mA（DC 5V）
Working voltage range: DC 5～18 V
Load capacity: ≤10 mA（DC 5V）
Operating temperature range: ≤80℃
Operating humidity range: 35%～90%RH (no frost)
Storage temperature: -25～+ 80℃
Storage humidity: 25%～95%RH
Size (L x W x H): Approx. 5.8 x 3.4 x 2.7cm / 2.28 x 1.34 x 1.06 inch
Output interface diameter: Approx. outer 7mm, inner 3mm
Package Includes:
1 x Water Flow Sensor Switch Meter Flowmeter Coffee Dispenser Counter
No-delivery refund
