TIRE REPAIR KIT - QUICK TIRE REPAIR WHEEL. It's a great replacement for your spare tire. Ideal for car use. Suitable for tubeless tires. This repair kit will allow you to repair punctures quickly and effectively. Its compact size makes it very handy, so you can always have it at hand. You never know what might happen on the road, so it's worth checking out our kit! INCLUDES: drill with handle, awl with handle, 5 10 cm long vulcanizing cords, each 12g glue. The kit allows for quick tire repair. It's ideal for off-road use when replacing a puncture is not possible. However, please remember that this is a temporary solution that allows you to reach your destination or the nearest tire shop. This kit is not suitable for cut tires or sidewall punctures, only for areas with tread. Instructions for use: 1. Remove the nail from the punctured tire. 2. Coat the cutter with the included glue and insert it into the hole left by the nail, following the angle at which the nail entered the tire, to ensure the hole is properly filled with glue. 3. Thread the string onto the awl and bend it in half, ends up. 4. Coat the string with glue and press the threaded string into the nail hole using the awl, following the angle of the previous penetration. Firmly push the awl and string through the damaged area. Be sure to pass the string through the entire tire layer. Be careful not to pull the entire rope inward. The two ends of the rope should extend approximately 0.5 to 1 cm above the tire tread. Firmly remove the awl from the tire (do not twist the awl inside the tire while removing it; this may cause it to break). 5. Cut off the two protruding ends of the rope, leaving 5 mm above the tire. The rope will be flush with the tread surface as you drive.
החזר על אי אספקה