StudioDaydream Studio Daydream Junction Box MIDI DIN JCTB/MD2 V1.0

Junction box DIN connector [MIDI cable included] 2-line model, essential for building a pedal board You can raise the height of the main unit and stack the same series using the included stack plate. This is a 2-line model with a DIN connector [MIDI cable included] for a junction box, which is an essential item for building a pedal board. You can consolidate the input and output of the entire pedal board in one place, making wiring neat and tidy. It is possible to shorten the setup time before the actual production and prevent unexpected troubles. In addition, by attaching the included stack plate, you can increase the height of the main unit to prevent the DIN connector from interfering with the edge of the effector board, or you can stack the 2-line junction box series in your favorite combination. *The fourth photo shows the contents of the product set. Other photos are used images. *The height of the combination shown in the 7th photo on the right is approximately 83 mm [approximately 80 mm when the top screws are removed], and the height of the left combination is approximately 68 mm [approximately 65 mm when the top screws are removed]. When using the pedalboards stacked together, please carefully check the internal dimensions of the pedalboards you are using. ■Specifications overview ・DIN1: DIN connector [3PIN/5PIN(MIDI)/7PIN/8PIN] *Compatible with those with pins arranged in a 45 degree arrangement on concentric circles ・DIN2: DIN connector [3PIN/5PIN(MIDI)/7PIN/8PIN ] * Compatible with pins arranged in a 45 degree array on concentric circles - Body size: Width approx. 63mm x Height approx. 69mm x Height approx. 32mm *Includes protrusions such as screws ■How to use - Lines with the same name are connected internally. ・Since there is no directionality, either side can be used as IN or OUT. -DIN supports up to 8-pin connectors, including 5-pin MIDI cables. Since it is a passive connection, there is no function to amplify the signal.