Name:Pocket Inclined Hole Drill Jig Woodworking Kit Portable Hole Jig Joinery System
Specifications:
Model:572259
Material:Alloy steel
Size:275 x 60 x 155mm
Note: The thickness of the wood cannot be less than 12mm, and not exceed 38mm.
Operation method of inclined hole drill:
1.adjust the height of the drill bit,
2.clip to play board,
3.put the drill into the hole to touch the board,
4.move the drill up 5 mm (remember do not start the drill when the drill touch the board.)
5.start the drill reaches a certain speed between 500-1500
6.Slowly to drill at first, then your can speed up when the front end of the drill bit into half or all.
Three hole Inclined hole instruction:
Thank you for using carpenter slant hole, scale line adjustment, start playing 12-13 mm board (screw normal don't need adjust, according to user needs), upward adjustment one frame for the increase of 1 mm, upward again, and so on.
You can adjust the drilling depth according to your needs, such as to increase the plate thickness, quick clamping backward adjustment, or remove the slider, and can match with F folder or C type pliers.
Features:
*Made of high quality alloy steel material,very durable and not easy rust.
*Can be quickly clamped to a bench or attached permanently.
*Thermoplastic grips and knobs,convenient to use.
*With two drill bit,spanner,screws and plastic cap.
*Small volume,convenient to carry.
Package Include:
1 x Pockethole Jig
1 x Drilling Bit
1 x Screw Drill Dit
14 x Screws
18 x Pocket Plastic Plugs
החזר על אי אספקה
