Characteristics
Country of manufacture：China
Operating voltage: 3.7V
LED touch screen
3600 mah lithium battery
16 far infrared lamp beads
Main functions:
3 levels of constant temperature wormwood compress (temperature (room temperature 25°)
1st gear -≈45℃
2nd gear -≈55℃
3 gear -≈65℃),
Vibration massage, full knee wrap, 30 minutes timing; Electrode physiotherapy;
How to use:
Press and hold the power button for 2 seconds to start the machine. The power indicator is on.
By default, the start position of the hot compress function is 1.
The hot compress is \01\ and the infrared light is on.
The start position of the vibration function is 1, and the vibration is displayed as 01.
The output strength of the electrode patch is 1
Press and hold the power button for 2 seconds to turn off the hot compress function. Each time you press the hot compress key, the hot compress function gear increases by 1 gear, for a total of 9 gears. 1-2-3-4-5-6-7-8-9-close-1 cycle in sequence.
The hot compress is displayed as 01 02 03 04 06 07 08 09 00 01.
When the hot compress function is turned on and off, the infrared light is turned on and off
Each time the vibration key is pressed, the vibration function gear will increase by 1 gear, for a total of 9 gear positions. 1-2-3-4-5-6-7-8-9 Shut down -1 and loop.
Vibration is shown as \01\ \02\ and \3\ \4\ \05\ \6\ to \7\ \08\ \09\ \00\, and \01\. There is only one combined vibration mode.
Each time the button is pressed, the functional strength of the electrode is increased by 1 gear, a total of 5 gear, and the cycle is 1-2-3-4-5-1 in sequence. There is only one combination of electrodes.
When the battery is low, the power indicator blinks and the buzzer says \Drip, drip\, indicating that the battery needs to be charged.
When the power is extremely low, the power indicator flashes, the buzzer says \drip, drip, drip,\ and then automatically turns off
Press the \on\ button to close, and automatically close after 30 minutes of work
When charging, the power indicator blinks.
When the battery is fully charged, the power indicator is steady on
Note:
1. Before use, please fully charge the product and charge for about 2-3 hours
2. It is not recommended to completely drain the battery
3. When the power indicator blinks, charge it in time
החזר על אי אספקה
