These are 2 types to choose :1) 2286Mhz-868Mhz :Multi Frequency 2) 433Mhz Fixed Code :Only for 433MHZ Specifications:
-- Product material: ABS
-- Product size: 50*40*10mm
-- Product weight: 35 g
-- Rated voltage: 3 V
-- Installation: wireless
-- Corresponding frequency: 286-868MHz
-- Scope of application: garage door, alarm, automatic door, rolling door, etc.
-- Copy frequency :300mhz /310mhz /315mhz /390mhz /433mhz /433.92mhz /434.42mhz /868mhz
Function description
Code cleaning method:
Press the B button and A button at the same time, after the LED indicator light flashes three times, loosen any one of the buttons while the other is kept pressing, then push the released button three times, the LED indicator will enter into the fast flashing status. At this time all the memory data is cleared, the cleaned remote control will not have lighting LED indicator no matter which button you press.
Copy method
One hand keeps the original remote controller, while another keeps the copy remote control, the two remote controls should be placed as closely as possible (the ideal situation is to put the two remote controls on the desktop side by side with zero distance), respectively press down the copy button, when the LED indicator light flashes quickly after three flashes, this copy is successful, other key operating methods are the same. Some remote control has a smaller transmitting power, so the original remote control should be placed back to the copy remote control to be operated. For the presence of noise, it should avoid interference to operate, If the copy is not successful, it should recopy after clearing code. Attention: Your original remote control must be able to work and the same as our remote control frequency
Recovery code operation
Press and hold the A and B buttons of the copy remote control at the same time until the indicator light flashes quickly, you can restore the remote control code that was cleared before.
Copy the chip
2260, 2262, PT2264, 5326, SC5262, HT600, HT680, HT6207, HT6010, HT6012, HT6041, SMC918 series, 527, 1527, 2240, HCS101, HCS200/HCS201 (partial code), HCS300/SCH3001 (partial code), part Single chip microcomputer.
Notice:
(1) The working voltage cannot exceed the working voltage.
(2) In an environment with relatively large wireless interference, the transmission distance may be reduced.
(3) Keep it out of reach of children.
(4) It is forbidden to use it in a humid environment, otherwise it may cause damage to the remote control.
החזר על אי אספקה
