G1 4 Electric Solenoid Valve RO Machine Water Inlet Controller Normally Closed DC12V

Feature: 1. This valve come with stable performance, sturdiness and durability, safety and reliability 2. Electric solenoid valvewith high sensitivity, quality assurance, and beautiful appearance 3. The product have direct‑acting diaphragm structure, no pressure start, expanding its application field 4. Normally closed inlet valve adopt threaded interface design, possess simple and convenient installation 5. Adopt imported stainless steel springs and good‑quality materials, the normal operation is not less than 200,000 Specification: Item Type: Electric Solenoid Valve Material: Nylon,stainless steel Thread Interface: G1 4 Water Valve Type: Normally closed water inlet valve Operating environment altitude does not exceed 2500 meters; atmospheric pressure is 86 106KPa Ambient Temperature: +1 celsius +45 celsius ; Water Temperature: 0 celsius +100 celsius ; Storage and Transportation Temperature: 30 celsius +60 celsius Protection Grade: IP00 Relative Humidity: less than 95percent Rated Working Voltage: DC12V Inner Diameter Outer Diameter: Approx. 9mm 0.4in, 13mm 0.5in Working Pressure: 0.02 0.8MPa Thread Length: Approx. 12mm 0.5in Coil Resistance: 27.7 Ohm . Package List: 1 x Electric Solenoid Valve Note: The solenoid valve is mainly divided into normally open, normally closed, inlet valve and drain valve. The explanation is as follows, buyers must choose according to their own requirements, so as to avoid unnecessary losses caused by unsuitable purchases.1. Normally open‑refers to closing the valve when energized2. Normally closed‑refers to opening the valve when power is applied3. Water inlet valve‑‑refers to the water pressure environment of 0.02‑0.8MPa, where there is water pressure4. Drain valve‑refers to the water column used at the working pressure of less than 400mm