Compatible Vehicles:
Compatible with Porsche 911 Carrera, Carrera 4, Carrera 4 GTS, Carrera 4S, Carrera GTS, Carrera S, Targa 4, Targa 4S, Turbo, and Turbo S models (3.4L H6 - Gas, 3.6L H6 - Gas, and 3.8L H6 - Gas) from 2012 onwards.
Compatible with Porsche 911 Carrera, Carrera 4, Carrera 4S, Carrera GTS, Carrera S, GT3, GT3 RS, GT3 RS 4.0, Speedster, Targa 4, Targa 4S, Turbo, and Turbo S models (3.6L H6 - Gas, 3.8L H6 - Gas, and 4.0L H6 - Gas) from 2011 onwards.
Compatible with Porsche 911 Compatible with Carrera, Carrera4, Carrera4S, CarreraS, GT3, Targa4, Targa4S, Turbo 3.6L H6 - Gas, 3.8L H6 - Gas (2010 model)
Compatible with Porsche 911 Carrera, Carrera4, Carrera4S, CarreraS, Targa4, Targa4S, Turbo 3.6L H6 - Gas, 3.8L H6 - Gas (2009 model)
Compatible with Porsche 911 Carrera, Carrera4, Carrera4S, CarreraS, GT3, GT3 RS, Targa4, Targa4S, Turbo 3.6L H6 - Gas, 3.8L H6 - Gas (2008 model)
Product Information:
Material: Rubber
Color: Yellow
Type: Engine Mount Bush Buffer Stop
Installation Location: Rear
Top Diameter: 47.5mm 1.87 inches
Bottom Diameter: 49.5mm / 1.93 inches
Height: 66mm / 2.6 inches
Hole Diameter: 19mm / 0.75 inches
Performance:
Directly replaces broken strut mount supports.
Durable and reliable. Rust-resistant, will not corrode or peel.
The main purpose of a bump stop is to act as a cushion when the suspension breaks.
OE Number:
99633310502
Note:
a. This is a non-genuine part, accessory only!
b. Please check your vehicle model before purchasing.
c. Due to manual measurement, there may be a size error of approximately 1-2 cm.
Installation Method:
Direct Installation: Directly replaces broken suspension strut bumpers.
Fits: Porsche 911 Carrera, Carrera 4, Carrera 4 GTS, Carrera 4S, Carrera GTS, Carrera S, Targa 4, Targa 4S, Turbo, Turbo S 3.4L H6 - Gas, 3.6L H6 - Gas, 3.8L H6 - Gas (2012 and later); Porsche 911 Carrera, Carrera 4, Carrera 4S, Carrera GTS, Carrera S, RS, GT3, GT3 RS, GT3 RS 4.0, Speedster, Targa 4, Targa 4S, Turbo, Turbo S 3.6L H6 - Gas, 3.8L H6 - Gas, 4.0L H6 - Gas (2011 and later).
Product Information: The primary purpose of bump stops is to act as a cushion in the event of a suspension failure. Top Diameter: 47.5mm / 1.87", Bottom Diameter: 49.5mm / 1.93", Height: 66mm / 2.6", Hole Diameter: 19mm / 0.75"
OE Number: 99633310502
Direct Fit: Directly replace your broken suspension strut bumper/bump stop
Package List: 1 suspension strut bumper
החזר על אי אספקה
