Features:
easy and simple to use, labor-saving and stable; flexible lifting, easy to operate
Car jack 1.5T:
Parameters: jack size about 36*9CM, lifting height 10-33.5CM
Cross saving wrench 34*2.3cm, thickness 1cm
Material: steel plate
Packing list:
1 * Jack
1 * Cross saving wrench
Instructions for use:
① before lifting the vehicle parked on a level hard surface, tighten the handbrake to stop the wheels from moving, open the danger warning signs
② Block the wheel diagonally opposite the replacement tire, loosen the replacement nut, but do not unscrew it
③Remove the jack, and use a rocker or wrench to raise the jack to a suitable height first;
④ Place the jack under the jacking part specified by the automobile manufacturer, turn the handle clockwise to make the jack saddle contact with the jacking part and check whether the contact is safe and reliable;
⑤ Then crank the handle to jack up the vehicle to a suitable height, replace the tire and tighten the nut;
Attention to use:
1. Do not overload the use;
2. In order to ensure the normal use of the jack, please keep the jack threads clean and lubricated, before each use, please smear enough oil on the screw;
3. This product can only support, and cannot be used as a fixed bracket. It is forbidden for people to enter the bottom of the vehicle when supporting it.
4. Please stop using it immediately if it inclines during the support, and use it after adjusting the position.
החזר על אי אספקה
