1.Mount the glue stick into the glue gun,pull the trigger to let the glue stick
enter into the glue gun, connect the power source and preheat for 5 minutes;
2.Use a proper drawing gasket. Large dent requires a large drawing gasket.
(Note: The larger the drawing gasket is, the larger the drawing force is);
3. Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes
of gasket should be applied with hot melt glue);
4. Fast place the drawing gasket with hot melt glue at the center of dent, press
lightly until the glue cures and adheres (Let the glue cool for about 8 minutes.
The cooling time should be less than 10 minutes and should be shorter slightly
in winter);
5. Align the T-shaped repairer and press the drawing gasket with hot melt glue,
pull the sliding rod backwards to pull up the dent;
6. Check with a Line board. If dent still exists, knock it slightly with a
flattening hammer or pen;
7. Clean the repaired place with a clean wet cloth.
Package Contents:
1* Car Dent Puller Tools
18* Blue Glue Tabs/ Lifter Glue Puller
Only the above package content, other products are not included.
החזר על אי אספקה