Technical DataMeasuring Range: 0 - 25 mmAccuracy: 0.01 mmOperating Temperature: 5 C - 40 C / 41 F - 104 FHumidity Effect: Negligible below 80% relative humidityPurpose / ApplicationFor precise measurements in the range of 0 to 25 mmMethod UsePreparation for use:- Clean the measuring surfaces and the guide. Use a cotton cloth for this purpose. Do not use solvents or acids.
- Check the zero position and, if necessary, adjust it with the included wrench so that the line marked "0" on the drum aligns with the horizontal scale line.
Measuring method:- The drum can only be rotated after unlocking the locking clamp.- Separate the measuring surfaces slightly further than the object being measured.
- Then, by turning the drum, adjust the rough setting, and then continue tightening by turning the friction clutch knob.
- Stop tightening when the clutch engages, meaning further turning the knob will prevent the drum from rotating.
- Read the measurement result according to the measurement principle shown in the drawing.
It is recommended to clamp the object being measured or a micrometer before starting the measurement. This will ensure the highest measurement accuracy.It is also recommended to perform several measurements to obtain an arithmetic mean of the results.
החזר על אי אספקה
