A special high speed chip is used to process the input and output (ICelsiusO) signals. It is capable of making the ine work stably, with the features of correcting and enlarging the signals that removing the unnecessary disturb signals. The computer LPT po
There are 5 input signals, communicating with the host computer, which are isolated by the optical coupling. Among the optical coupling isolation, the P11 and P12 are high-speed, which can be used for connecting main shaft encoder, or the same demanding
There are 12 output signal, which is allowed to controlling output, supporting as many as 6 axls linkage. Some of the output port is reusable functionality. Meanwhile, one port only can be used as one function
Description:
It is used to run the signal processing ofthe host computer ( LPT port ), with 3 CNC system software, and theperipheral ine dynamic electrical. It is suitable for CNC engraving ine, CNC lathe, CNC plasmacutting ine, engraving ine, CNCmilling ines, ining centers and other ine tools. With the hostcomputer and the 3 series software, it can be the most cost-effective CNCsystem.
Features:
A special high speed chip is used toprocess the input and output (ICelsiusO) signals. It is capable of making the inework stably, with the features of correcting and enlarging the signals thatremoving the unnecessary disturb signals.
The computer LPT port supplies the powerindividually, separating from the power supply of other parts. Therefore, thecomputer and ine tool isolate effectively. It makes the data more secure,with further of security and stability.
There are 5 input signals, communicatingwith the host computer, which are isolated by the optical coupling. Among theoptical coupling isolation, the P11 and P12 are high-speed, which can be usedfor connecting main shaft encoder, or the same demanding signal as hand wheelA, B. 12V-OUT and 5V-OUT power output interface can be used to pick somenecessary power, such as the hall and the proximity . Thereare 5 input ports, set to limit, origin, knife, start, stop, spindle speedinput, MPG input and any other one of the 5 functions.
There are 12 output signal, which isallowed to controlling output, supporting as many as 6axlslinkage. Some ofthe output port is reusable functionality. Meanwhile, one port only can be usedas one function.
There are 3 replays, P2, P3 and P4,which can support 3 control software programming. The relay s on or off canbe controlled through the control of 3 software. Each relay has attractedindicating lamp, which is more intuitive and convenient. The 3 relays can beused to control the opening and closing of the liquid coolant, mist coolant,liquid state coolant and so on. They can also be used to control theelectromagnetic valve device power . P2 port is for the spindle, P3 portis for the cooling liquid, P4 port can be defined.
The high speed optical coupling isolationis used to control the rotational speed of spindle. The output port is parallelport P1, which can output the PWM signal within 2.5KHZ. On the interface board,there is a DCelsiusA circuit, with PWM to a 0-10V. The circuit can output 0-10V to control the inverter which only has analog speed control in themarket. Thus it can control the rotational speed of the spindle. It is importantthat the PWM output and 0-10V output can only choose one in two. They cannot beused at the same time.
Interface board can be connected withthe cathode or total output to the stepper drive, or servo drive (servo drivermust support the digital signal). The output is the 5V .
Wide input voltage power supply:15-32VDC. The function of preventing reverse connection . 2 groups ofoutput voltage: 5V and 12V voltage, 100MA output capacity.
Specifications:
Model: 3V2.1-L
USB: Type B
Size: 11*7.5*2.4cmCelsius4.3*2.95*0.9in
5 input ports
portfunction
P10emergency stop
P11reserved
P12reserved
P133 axls limit
P15r
החזר על אי אספקה
