• You can access the constant power, ACC, IG2, illumination, and reverse power (normally by removing the deck or getting power from the fuse) with this one.
• When using constant power, a fuse must be inserted in the specified location.
• Contents: Optional coupler, installation manual, (image shown: fuse, bullet terminal)
• Compatible models: ZR-V (RZ-3, RZ-4, RZ-5, RZ-6)
Product description
This is a power connector (instruction manual, fuse, gigosios) for retrofit options on Honda vehicles.
Very easy to install ☆ Just plug it into the fuse box in the driver's seat!
After plugging it in, you can use the following power sources!
It can be used even if the fuse box outlet is already used in genuine products (fog lights, daylights, footlights), etc.
1.Backup battery power supply (always on)
*As per the instructions, it cannot be used unless the fuse is inserted.
2.Accessory power supply (ACC) (turns on by turning the key once or pressing START once without stepping on the brake)
3.Ignition power supply (IG2) (turns on by turning the key twice or pressing START twice without stepping on the brake)
4.Illumination power supply + (illumination) (energized when the small light is lit)
5.Back signal (reverse signal)
*Due to lot changes, there may be changes in wiring color and usage.
*We will only respond to initial defects within 7 days after receiving the product.
*If you have any questions or compatibility, please ask before purchasing.
*Please install at your own risk.
*All products shipped from A.K factory have been tested for operation.
Caution (Disclaimer) > Please read carefully
*This product is a product exclusively for the car model.
Please note that it cannot be installed on other vehicle models, and exchanges and returns for different vehicle models will be handled at the customer's convenience.
Be sure to install a fuse between the parts to be installed and the optional coupler.
Doing so may cause a vehicle fire or malfunction.
Even if there is an unexpected accident, we will not be held responsible at all, so please understand that you are responsible for the installation work.When you remove the coupler that was originally inserted, the settings may be initialized depending on the attached items, so please set them again.
Please check if there is space in the coupler socket before purchasing.
החזר על אי אספקה
