YKY 4x1.5 0.6/1kV power cable to ground NKT 11194015

Cables intended for permanent installation, indoors and outdoors, directly in the ground and in concrete enclosures, resistant to UV radiation. These products may only be installed by persons with the necessary education and authorization in the field of electrical installation work. The design of these products complies with the indicated subject standards. During installation work, it is required to comply with applicable regulations in this area. Technical data: Nominal voltage 0.6/1 kV Test voltage 4 kV Highest permissible temperature of conductor +70°C Highest permissible temperature of conductor under short-circuit conditions +160°C (less than or equal to 300 mm squared) +140°C (greater than 300 mm squared) Operating temperature range -35 °C to +70°C Lowest permissible cable laying temperature -5°C Lowest permissible cable storage temperature -35 °C Insulation colours (colour identification of cores) HD 308 S2 Outer sheath colour black Nominal insulation thickness [mm] 0.8 Nominal thickness of outer sheath [mm] 1.9 Outer cable diameter – calculated value [mm] 11 Approximate weight of 1m cable [kg] 0.174 Note! 1 piece is 1m of cable, 2 pieces are 2m of cable, 3 pieces are 3m of cable, etc. NOTE! All cables and wires are shipped in one piece, if possible. However, we recommend contacting the store before purchasing to ensure that the selected length will be available. If you would like to receive several pieces, please let us know in the order comments! For larger quantities, there may be an additional charge for the drum(s) on which some types of cables and wires are wound!