[Important Note - For Overseas Customers]
Thank you for purchasing this product. Please read the following important notes carefully before using this product overseas.
1. Legislation and safety standards
This product complies with Japanese safety standards. Please check compatibility with local regulations and safety standards before use in your country.
Certain product categories (electronics, cosmetics, food, etc.) may require certification from the importing country.
2. About electrical products
[Voltage compatible]
When using electrical appliances, please note that they are designed according to Japanese voltage specifications (90-110V), so using them at a different voltage may cause malfunctions.
[Plug type]
Our products use the Japanese plug type (A type or B type).
Please use a conversion adapter if necessary.
[Important notes regarding transformers and adapters]
A transformer adjusts the voltage to suit the requirements of the equipment.
Conversion adapters only change the shape of the plug and do not adjust the voltage.
Using only the conversion adapter without a transformer may damage the product.
[About responsibility]
We are not responsible for any failure or damage caused by improper usage, such as operating the product without a transformer.
3. Language and manual
Product instructions and displays may only be in Japanese.
Package includes: 1 puller remover tool and 5 pins for motor shaft diameters of 0.9mm (cylindrical), 1.75mm (semicircular), 1.75mm (cylindrical), 1.9mm (cylindrical), and 2.8mm (semicircular). Allows removal of pinion gears from small motors.
Select the plate (board) that matches the size of the pinion gear and the pin that fits the motor shaft, insert the rotating lever, and tighten the pin with the grub screw. (Do not overtighten the grub screw.)
Hook the motor onto the plate, align the gear puller shaft with the motor shaft, and turn the handle clockwise to remove the pinion gear.
Use this tool to remove the pinion gear from mini 4WD cars, RC (radio-controlled) cars, and small motors for automobiles. Replacing only the small motor in an automobile is much cheaper than replacing the entire assembly. It's also environmentally friendly.
If the part is firmly pressed in, the puller may not be able to withstand the force. Do not apply excessive force.
Please note that colors and details may vary depending on the production period. Actual appearance may differ from what you see on your monitor due to lighting conditions.
Package includes: 1 puller remover tool and 5 pins for motor shaft diameters of 0.9mm (cylindrical), 1.75mm (semicircular), 1.75mm (cylindrical), 1.9mm (cylindrical), and 2.8mm (semicircular). Allows removal of pinion gears from small motors.
Select the plate (board) that matches the size of the pinion gear and the pin that fits the motor shaft, insert the rotating lever, and tighten the pin with the grub screw. (Do not overtighten the grub screw.)
החזר על אי אספקה
