Tuningfan Shift Pattern Upper Left for Manual Transmission Emblem, Red, R, 6-Speed Vehicles, Forward, Elf, Fighter, Dutro, Red, SPE-R604

【Important Notice for International Buyers – Tomoayax OEM Vehicle Parts Japan】

■ Product Compatibility (Fitment) Please ensure that this part is compatible with your vehicle before purchase.

Compatibility may vary depending on model, year, grade, and specifications. Please confirm compatibility by part number on your own responsibility.

We do NOT provide fitment confirmation. Please contact your local dealer and confirm compatibility using the part number.

For accurate verification, we strongly recommend checking with your VIN (Vehicle Identification Number).

■ Buyer Responsibility The buyer is fully responsible for confirming compatibility before purchase.

We are not responsible for incorrect orders due to lack of fitment confirmation.

■ Installation Professional installation is highly recommended.

We are not responsible for any damage or issues caused during or after installation.

■ No Return / No Refund Policy We do NOT accept returns or refunds for: ・Incorrect orders ・Compatibility issues ・Parts that do not fit your vehicle ・Installation errors or damage

■ Product Information All items are genuine OEM parts from Japan unless otherwise stated.

Please carefully review the product description and images before purchase.

■ Liability We are not responsible for any damage, malfunction, or issues caused by improper use, incorrect installation, or incompatibility.

■ Final Notice Please ensure full understanding of the above before purchasing. Tuningfan Shift Pattern Emblem - RED (Red) - For 6MT Vehicles Base material with hairline finish + clear dome processing. Size: 16mm (height) x 22mm (width) x approximately 2mm (thickness) Made with non-yellowing polyurethane resin. Adhesive: Strong adhesive. Made in Japan. Tuningfan Shift Pattern Emblem, Red, Upper Left R, for 6-speed Manual Transmission Vehicles Part number: SPE-R604 A red shift pattern emblem, a highly requested item, is now available. Red-stitched sports cars, and even decorated trucks featuring Kinkazan or Chinchilla fabrics, are a perfect match! Rare 6MT upper left R shift pattern emblem Isuzu Forward, Elf, Gala; Fuso Best One Fighter, Aero Ace Hino Dutro Selega HKS 6-speed dog transmission Toyoace Recommended for: Using a dome made of highly transparent polyurethane resin It combines a three-dimensional, beautiful gloss with high durability thanks to UV protection. Upgrade your interior with a touch of luxury that sets it apart from typical stickers. This applies to all 6-speed manual transmission vehicles with the same pattern as indicated. It can be installed simply by attaching it to the side of the shift boot or the shift panel. The dimensions are 16mm (height) x 22mm (width) x approximately 2mm (thickness). To ensure it can be applied anywhere, it is made to almost the same dimensions as the original shift pattern labels from car manufacturers. A simple and timeless design that eliminates unnecessary logos and decorations. Tuningfan Original Product By applying red to a metal hairline base, It has a texture similar to anodized aluminum, where the color changes depending on the viewing angle. By choosing a slightly darker red color to match the red stitching on the shift boot and seats, Examples include the ZC6/ZN6 AE86/BRZ, ZC32S/ZC33S Swift Sport, ND5RC Roadster, VAB WRX STI, etc. It also pairs well with the interior of sports cars that feature red stitching. *Shift knobs without a shift pattern printed on them will not pass vehicle inspection. For driving on public roads, the installation of a shift pattern plate like this is mandatory. Recommended for those with aftermarket shift knobs that do not have a pattern plate installed. The adhesive used in this product is made of the strongest possible material, If there is dust or oil on the surface to which you are applying the sticker, the adhesive strength will inevitably decrease significantly. If a polishing agent or similar product has been applied, Please remove any residue thoroughly using parts cleaner or alcohol wipes before applying. After peeling it off the separator (backing), carefully stick it on, making sure not to touch the adhesive surface. Apply pressure to the entire surface and press firmly to ensure a tight fit. It can take up to 24 hours for the adhesive to stabilize after initial adhesion. Please avoid moving or repositioning it. If the temperature is below 10 degrees Celsius, it will be difficult to apply, so use a hairdryer or similar device. Please warm it slightly before applying. Flat/gently curved surfaces made of common plastics (PE, PP) This product is designed to be attached to interior panels. For application to rough surfaces such as textured surfaces, curved surfaces, and soft-touch painted surfaces: Please use the included double-sided tape (JIS "Super Strong" tape, manufactured by 3M). Dome section: Polyurethane resin (non-yellowing) Pattern markings: Hairline laser printing Adhesive: Strong adhesive