Solo+ 100 Wall-Mounted Heat Recovery Unit For Single Rooms + Remote Control

Application - Efficient, energy-saving constant ventilation of individual rooms, while minimizing heat loss; - Filtration of incoming air; - Supporting the maintenance of proper air humidity; - For mounting directly in an external wall. Humidity sensor The device can be controlled using a humidity sensor. Using the included plastic screwdriver, set the required humidity level on the potentiometer within the range of 60-90%. If the humidity in the room exceeds the set value, the device automatically turns on and operates until the humidity returns to normal. Installation Through-wall installation in an external wall - this is quick and easy installation of the ventilation unit. How does it work? The device operates in two 60-second cycles: 1st cycle Warm, stale air extracted from the room flows through the heat exchanger, transferring heat and moisture. After 60 seconds of warming up the heat exchanger, the ventilation unit switches to fan mode. Cycle II Fresh, cool outside air flows through the heat exchanger. The air is humidified and warmed by the heat previously stored in the exchanger. After 60 seconds, the fan switches back to exhaust mode and the cycle repeats.