Screws For Carpentry Joints Ssh 10.0X50Mm

Screws for carpentry connectors with hexagon head and TORX socket 10x50 mm (50 pcs.) The most important parameters Model: SSH Size: 10x50 mm Maximum usable length: 8 mm Quantity: 50 pcs. Socket: SW-13 and TX-40 Material: carbon steel with Impreg®+ protective coating, which provides very good corrosion resistance and allows outdoor use. The Impreg+ protective layer ensures a low risk of galvanic corrosion when combined with aluminum or stainless steel. Original product of the renowned company SIMPSON Strong-Tie ® Construction screws for wood and carpentry joints with full or partial thread and hexagonal head and additional TX star socket. Product specifications [ d ] screw diameter: 10 mm [ dh ] head diameter: 15 mm [ duh ] diameter under head: 10.2 mm [ ht ] head height: 6 mm [ l ] length screw: 50 mm [ lg ] thread length: 42 mm Socket: TX-40 Benefits 1. Head with SW-13 and TORX socket It has a large contact surface between the screw and the tool, which reduces the risk of slipping and damage to the screw head, allows for better transfer of rotational force, which is particularly important when working requiring high precision. 2. High corrosion resistance The special Impreg+ protective layer ensures very good corrosion resistance, which allows the product to be used outdoors. Increased corrosion resistance comparable to hot-dip galvanized steel with a zinc layer thick (55 µm). 3. Increased mechanical strength The widened screw shank under the head completely fills the hole. These construction screws are designed to carry heavy loads, which has been confirmed by tests conducted in accordance with European standards. 4. Tip Prevents wood from splitting, while the grinder and serrated thread reduce torque when screwing. 5. Service class 3 Characterized by a material moisture content corresponding to a temperature of 20°C and a relative humidity of the surrounding air exceeding 85%. Bit in packaging Application and method of installation Intended for attaching carpentry joints to timber. Certificate ETA-21/0670 of 2021/12/09 This European Standard specifies requirements and test methods for materials, geometry, strength, stiffness and durability (i.e. corrosion protection) of fasteners used in load-bearing timber structures. The products we offer are characterized by the highest quality and can be safely used in construction. We make every effort to ensure that the products delivered to our contractors are safe and adapted to specific tasks. *The measuring tape is not included in the set.