Tuya Wifi Wall Heat Recovery Unit Remote Control Filter 60 M3/H Fan 3 Speeds

AV-TTW5-W wall-mounted heat recovery unit with Wi-Fi This is a modern ventilation device that provides fresh and clean air in closed rooms. The wall-mounted heat recovery unit not only exchanges the air , but also recovers heat and moisture from the exhaust air , thus ensuring comfort and energy savings. The AV-TTW5-W heat recovery unit is ideal for: houses apartments hotels cafes shops other facilities where proper ventilation is needed 97% recovery efficiency The heat recovery unit not only provides fresh and clean air but also saves energy and money . The device recovers up to 97% of heat and moisture from exhaust air, thanks to which significantly reduces heating and air conditioning costs . The wall-mounted recuperator is therefore not only environmentally friendly , but also wallet-friendly. A wall-mounted heat recovery unit is an investment that quickly pays for itself and provides benefits year-round. How does the AV-TTW5-W heat recovery unit work? The main elements of the recuperator are main unit telescopic tubes filter ceramic heat exchanger The recuperator works in two cycles of 75 seconds each: In the first cycle warm and polluted air is exhausted from the room, heating and humidifying the ceramic heat exchanger In the second cycle the wall recuperator blows in cool and fresh air from outside, which is heated and humidified by the ceramic heat exchanger. In this way, the wall recuperator ensures optimal temperature and humidity in the room. Watch the video presentation https://www.youtube.com/watch?v=oPf6WeJjhSo Built-in humidity sensor Thanks to the sensor, the operation of the recuperator can be automated based on the relative humidity level in the room (RH) . For example, the recuperator can be configured to extract air from the room when a certain RH humidity value is exceeded, until the sensor reading drops to the desired level. Air flow blocking When the heat recovery unit is turned off, the front louver closes automatically, effectively blocking the flow of cold air from the outside. Control The heat recovery unit can be controlled with the remote control or via the Tuya app . The remote control allows you to select the operating mode, fan speed and boost mode. Thanks to the Tuya app, you have control over the heat recovery unit from anywhere in the world! The Tuya app is easy to use and compatible with Android and iOS systems. It provides full control over the heat recovery unit and other smart devices, improving comfort and convenience of use . Energy class "A" Thanks to the technological solutions used, the model we offer as one of the few of this type is fully eligible for the government's "Clean Air" program for the years 2018 - 2029. Thanks to this you can get a refund of the costs incurred for its purchase and installation . Details of the Clean Air program can be found on the government website: www.czystepowietrze.gov.pl or by contacting your local government. Three operating modes Supply mode the recuperator blows fresh and clean air from outside, ensuring adequate ventilation and air quality indoors. Supply mode is recommended on warm days when we want to cool and refresh the interior. Regeneration Mode the device uses a ceramic heat exchanger to recover heat and moisture from exhaust air. Regeneration mode is recommended on cold days when we want to warm and humidify the interior while saving energy. Exhaust Mode stale and polluted air is extracted from the room, removing unpleasant odors and harmful substances. Extraction mode is recommended when we need to quickly get rid of excess moisture, smoke, or odors. In supply and exhaust mode, the heat recovery unit operates continuously - the cyclical operation described earlier only works in regeneration mode Simple installation The AV-TTW5-W heat recovery unit is easy and quick to install . Just drill a hole in the wall, place the telescopic tube in it and screw the mounting plate. Then place the main unit of the heat recovery unit against the mounting plate, and the strong magnet will automatically attract it. All that remains is to connect the power supply and the wall-mounted heat recovery unit is ready for use! The device is equipped with a telescopic tube , which you can easily adjust to the wall thickness . The tube has a minimum length 27.5 cm and a maximum length 47.5 cm and ensures a tight connection of the recuperator with the opening in the wall. Watch the video presentation https://www.youtube.com/watch?v=nalJIUrogok ATTENTION The gasket shown in the instructional video and in the instructions is not required, as the space between the wall and the recuperator pipe must be filled with foam! Polish instructions included! Double F7 + G3 Filter Most similar devices only offer the basic G3 filter. Our recuperator additionally includes an efficient F7 filter, which has much greater air purification capabilities. The G3 filter is designed to initially capture larger pollutants, while the F7 filter thoroughly cleans the air of fine particles, pollen, and even viruses. Check the table above to check the capabilities of each filter class - the darker the green leaf, the better the filter copes with a given pollutant. Elegant and modern look The smooth white housing with discreetly placed keys fits any interior. The thoughtful design is also visible in the placement and brightness of the LEDs indicating the current operating mode and fan speed - they are unobtrusive, and their light does not distract or hurt the eyes. Variable operating speed The AV-TTW5-W recuperator can operate at four speeds , which can be adapted to different needs and conditions: Low speed - quiet and economical , provides basic ventilation and air exchange. Ideal for the night or when users are absent. Medium speed - efficient and comfortable , guarantees optimal ventilation and air quality. Recommended during the day or during normal user activity. High speed - intense and effective , enables maximum ventilation and air exchange. High speed is recommended in situations when we need to quickly refresh or warm the interior. Boost Mode Allows you to increase the fan intensity above standard speeds for approx. 30 minutes. Boost mode is recommended in situations when we need to get rid of excess moisture, smoke or odor very quickly Noise level On each of the three modes, we measured the noise level from a distance of 1 and 3 meters, here are the results obtained: Low speed 1 meter: 20 dB, 3 meters: 19 dB Medium speed 1 meter: 29 dB, 3 meters: 27.5 dB High speed 1 meter: 32.7 dB, 3 meters: 31 dB Operation at low speed generates noise at a level of approx. 20 dB - which is comparable to the loudness of forest noise (according to the CIOP classification - Central Institute for Labor Protection) Ventilation system The AV-TTW5-W wall heat recovery unit can work in pair with a second device of the same model, creating a ventilation system for a larger room or two rooms. When the heat recovery units are connected, they work synchronously - when one exhausts air, the other supplies . One of the wall heat recovery units then becomes the "master" unit and both devices are controlled by it. Technical data Maximum air flow 60 m³ / h Rated voltage (nominal) 230 V Connection method EU plug 230V* Rated power 7.8 W (nominal) Frequency 50/60 Hz Maximum efficiency 97%. Max. noise level 32.7 dB (A) Ambient temperature from - 20ºC to + 50ºC Relative humidity up to 80% Duct diameter 160 mm IP class IPX4 Telescopic tube length (minimum) 27.5 cm Dimensions 235 x 255 x 475 mm Weight 4.2 kg Suggested room area 40-50 m² *if necessary, you can remove the plug and connect the wires directly to the electrical box - this modification must be performed by a person with SEP 1kV or higher qualifications