• [High-density type] Equipped with ``120 LEDs per 1m'' which is double the conventional LED strip light ``60 LEDs per 1m''! Equipped with twice the number of LED chips, it is ideal when you want to shine light without any gaps.
• [One chip of elegance of light] A gentle and gentle light source equipped with one light emitting element in one LED. You can enjoy the elegant and gentle light production.
• [Surface waterproof specification] The base surface of the tape light body is surface waterproof with silicone coating. It can be used safely even outdoors.
• [Can be cut & comes with double-sided tape on the back for free processing] The tape can be cut in approximately 2.5cm increments, allowing you to freely adjust the length to suit the installation location. Double-sided tape is included on the back, making it easy to install without any tools.
• [Specifications] Tape length: 5m / Tape width: Approx. 8mm / Tape thickness: Approx. 2.5mm / Cable length: Approx. 14cm / Number of LEDs: 600 lights / Waterproofing: Tape light body only / Input voltage: DC12V / Current consumption (reference value): Approx. 2.9A (current consumption varies depending on the emission color and lot) / Polarity: Red wire (plus) Black wire (minus)
A high-density type with narrower chip filling intervals than normal LED tape lights!
The base surface of the tape light body is completely waterproof with silicone coating.
*There are some exposed terminals on the back of the tape light. Do not install it in an uninsulated location.
We have carefully prepared sizes so that you can use it as a small accent.
You can choose the size according to where you want to use it.
Please use it as a trial item before purchasing a long tape light.
Double-sided tape is attached to the back of the tape, so it can be easily pasted.
[External dimensions]
Tape light width: approx. 8mm
Tape light thickness: approx. 2.5mm
Cable length: approx. 14cm
*The red cord is the positive (+) pole, and the black cord is the negative (-) pole.
[Specifications/Specifications]
LED specifications: 3528 SMD 1 chip LED
Input voltage: DC12V
Current consumption (actual value): 0.58A (per 100cm)
Board color: black base
*One light is covered in a shrink tube.
Waterproofing: Tape light body only
*Coloring may vary depending on arrival time and lot.
החזר על אי אספקה
