Steering wheel adapter for Toyota vehicles 10Pin/6Pin/28Pin/24Pin Multilead

Toyota Steering Wheel Remote Control Adapter. Maintain your original steering wheel remote control functions when replacing your factory radio with an aftermarket radio. This adapter allows you to integrate your new multimedia unit with your factory steering wheel controls, providing convenient operation while maintaining OEM functionality. Highlights: Connection: Analog / CAN bus Connectors: Toyota 10-pin / 6-pin / 28-pin / 24-pin Compatible with OEM audio systems and 360° cameras Fader function is not supported Changing the vehicle language is only possible via the original radio Connectors and connections: Steering wheel control OEM → 3.5 mm jack socket / flying lead OEM antenna → DIN (male) OEM AUX → Cinch (red / white) OEM 360° camera system → Cinch (yellow) Blue wire: +12 V remote antenna power supply Available signals: Red: +12 V (ignition terminal 15) Orange: +12 V (lighting terminal 58) Purple-white: +12 V reversing signal Pink: vehicle speed signal (VSS) Green: ground GND – handbrake signal Output load capacity: max. 250 mAWith larger current consumption: Relay coil resistance min. 75 Ω Relay coil resistance min. 150 Ω Compatible Toyota models: Highlander (XU50) 2018 – 12/2019 Land Cruiser (J15) 10/2013 – 12/2017 Land Cruiser (J15) 01/2018 – 07/2019 RAV4 (XA3 / XA4) 01/2016 – 12/2018 Settings and installation: DIP switch settings according to the manufacturer's instructions for the additional device (BDA) Depending on the vehicle equipment and software of the new radio, some functions may be omitted or replaced with others Installation instructions (shortcut): Check all functions of the original system and vehicle settings. Disconnect the power supply and dismantle the OEM radio. Connect the interface according to the installation instructions. Connect the power supply as the last step. Configure the interface and aftermarket device (radio, camera, controls). Test the steering wheel remote control. Important information: Installation and any modifications should only be performed by qualified personnel. Improper connection may void the warranty or damage the device. Vehicles with different software or imported vehicles may have different functionalities.