Kanoan Taillight Cover Garnish Grille for Suzuki Jimny Sierra Nomad JB64 JB74 JC74 JB64W JB74W JC74W Taillight Frame Cover Custom Exterior Parts

Suzuki Jimny JB64 Sierra JB74W Nomad JC74W Taillight Cover Garnish Taillight Guard Exterior Custom Parts Aftermarket Parts [Set Contents] Main unit (left and right set) *Instruction manual is not included. *Please note that we do not provide support or answer inquiries regarding installation. *If you are unsure about installation, please ask a professional or mechanic to install it for you. [Compatible Vehicles (Reference)] ・Suzuki Jimny JB64W ・Suzuki Jimny Sierra JB74W ・Suzuki Jimny Nomad JC74W *Depending on the vehicle's grade and year, modifications may be required or installation may not be possible, so please be sure to check before purchasing. [Precautions] To prevent detachment, degrease the mounting area with a silicone remover or parts cleaner to remove dirt, dust, and wax. Always perform a fitting check before installation. In cold weather, such as winter, warm the tape with a hairdryer while installing. The adhesive strength will reach its maximum approximately 24 hours after application. Please refrain from driving until then. Due to the nature of the product, the edges may lift. In that case, please reinforce with double-sided tape. [Product Description] This taillight cover garnish, specifically designed for the Suzuki Jimny JB64 / Jimny Sierra JB74W / Jimny Nomad JC74W, is a highly practical exterior custom part that protects your precious taillights from scratches and impacts while adding strength and presence to the rear view. Jimnys are often used for outdoor and off-road driving, and the taillights are prone to damage from small scratches from branches and flying stones, as well as accidental collisions when loading and unloading cargo. By installing this product, you can achieve both protection and a stylish look at the same time. Made of ABS resin, it is lightweight yet highly durable and recommended for long-term use. With a natural design that blends in with the original lines, it enhances the ruggedness unique to the Jimny while tightening up the rear area. With a simple yet stylish finish, it matches not only city driving but also outdoor scenes such as camping, fishing, and off-road driving. It is a part that combines both a stylish effect and practicality. Installation is easy with double-sided tape, requiring no special tools, making it perfect for DIY enthusiasts. Once installed, it securely protects the taillights while giving the rear view a wilder look. This is a must-have custom item for Jimny owners, supporting your vehicle in a wide range of situations, from everyday driving to serious off-roading. Suzuki Jimny JB64 / Sierra JB74W / Nomad JC74W Dedicated Tail Lamp Cover Garnish Grille Tail Light Guard Bumper Protection Exterior Custom Parts Aftermarket Parts [Set contents] Main unit (left and right set) *Instruction manual is not included. *Please note that we do not provide support or answer inquiries regarding installation. *If you are unsure about the installation process, please have a professional installer or mechanic do it for you. [Compatible Vehicles (Reference)] Suzuki Jimny JB64W Suzuki Jimny Sierra JB74W Suzuki Jimny Nomad JC74W *Depending on the vehicle's grade and year, modifications may be required or installation may not be possible. Please be sure to check before purchasing. [Notes] To prevent it from falling off, degrease the mounting area with a silicone remover or parts cleaner to remove any dirt, dust, or wax. Always perform a fitting check before installation. In colder temperatures, such as during winter, please warm the tape with a hairdryer or similar device before applying it. The adhesive strength reaches its maximum approximately 24 hours after application. Please refrain from driving until then. Due to the nature of the product, the edges may lift slightly. In that case, please reinforce them with double-sided tape. [Product Description] These taillight cover garnishes, specifically designed for the Suzuki Jimny JB64, Jimny Sierra JB74W, and Jimny Nomad JC74W, are highly practical exterior custom parts that add strength and presence to the rear view while protecting your precious taillights from scratches and impacts. The Jimny is often used for outdoor activities and off-road driving, and the taillights are prone to damage from small scratches caused by branches and flying stones, as well as accidental collisions when loading and unloading cargo. This product provides both protection and a stylish look at the same time. Made from ABS resin, it is lightweight yet highly durable, making it ideal for long-term use. With a natural design that blends seamlessly with the original lines, it enhances the ruggedness unique to the Jimny while giving the rear end a more refined look. With its simple yet stylish design, this part is perfect not only for city driving but also for outdoor activities such as camping, fishing, and off-road riding. It's a part that combines both a stylish look and practical functionality. Installation is easy with double-sided tape, requiring no special tools, making it ideal for DIY enthusiasts. Once installed, it securely protects the taillights while giving the rear view a wilder look. This is a must-have custom item for Jimny owners, supporting your vehicle in a wide range of situations, from everyday driving to serious off-roading.