Rgb Led Strip 300 Led Smd Remote Control Power Supply For Living Room Decorative

Professional RGB LED strip 5 meters 300 LED SMD 5050 3-chip RGB Epistar Remote Controller

Professional RGB LED strip 5 meters 300 LED SMD 5050 3-chip RGB Epistar Remote Control Controller

High quality of workmanship

Quality guarantee

Used for room decoration

Cutting possible Sticky with strong 3M tape Possibility of dimming and brightening the light 4 lighting modes Possibility of brightening and dimming Possibility of setting 12 different color variants (brightness is not for this purpose) (included) Possibility of setting the color Control via a wireless remote control Low power consumption and high energy efficiency The tape is flexible - it can be easily stuck to the corners Easy to install The silicone cover protects against moisture High durability of the tape Long life of the LEDs The remote control allows control from a long distance

Create a unique room decor

Don't buy a pig in a poke!

Below are some examples of the differences between our tapes and tapes Competitive companies:

Brightness- Our products use high-quality LEDs. They shine with a bright and brilliant light. The lighting will be visible, whereas in Chinese copies it barely glows. Color Saturation- Sternhoff tapes shine with vivid colors. Cheap tapes have poor color reproduction. Our tapes shine with vivid colors. Uniformity- Cheap substitutes using low-quality LEDs have lighting of varying brightness and saturation. Our tapes have uniform lighting, allowing you to decorate the desired location. Build Quality- This aspect consists of several elements. The strips can fray, and low-quality adhesives are used, which can cause them to peel off. Many inexpensive LED strips can be found online. However, their price reflects their quality. By purchasing our product, you are purchasing a proven brand that cares about the quality of its products.

Specification

Manufacturer: Azaris Diode type:SMD 50503-chip RGB Epistar Number of diodes:300 Light colors:RGB CRI (color rendering index):Ra 80 Lifespan: approx.60,000 hours Number of lighting modes RGB:4 Protection level:IP44 (resistant to dust and rain) Strip length: approx.5m Strip width: approx.8mm Power cable length: approx.37cm Power supply voltage:12V Mounting:Self-adhesive tape Temperature range:from -25C to 60C Power consumption:14W Smooth transitions3 or 7 colors

Kit composition

LED strip Module with controller 12V power supply Remote control CR1220 battery (included with the remote control)

SMD 5050 3-chip RGB diode

Each LED on the LED strip is a diode consisting of 3 RGB channels (, , ). These are standard colors, the combination of which allows you to produce virtually any colors. Thanks to this solution, the strip can emit virtually any color and there are no large gaps between the diodes. Cheaper strips use three separate LEDs. Each emits one of the primary RGB colors. This means that it's impossible to set colors other than the primary ones. Turning off any color creates large gaps between the light points. This strip doesn't have any of the above problems. The LEDs are tightly packed next to each other. Switching colors does not turn them off, and you can set any color you want.

LED strip is used for interior design. It is one of the sales hits of recent years. Thanks to it, you can achievefashionable multi-color lighting. The strip also allows for lighting with just one color from the RGB palette. The tape's cuttable nature and high flexibility allow it to be attached exactly as desired.

It allows you to achieve atmospheric lighting. You can use it to illuminate a ceiling, desk, or TV. By using the tape, it is possible to achieve both a romantic atmosphere and a gaming style.

The tape can be stuck in many different places, such as:

Under the ceiling Under the cabinet/countertop At the stairs Backlight behind the TV or monitor

Remote control

The color, intensity and brightness of the light can be controlled using the remote control included in the set. It is also possible to set one of four lighting modes.

Lighting modes:

Adjusting the light intensity (brighter/darker) Switching on individual static colors, from 20 defined ones 6 arrow buttons - used to change the saturation of , and when programming DIY buttons DIY1-6 buttons are used to create and save 6 custom colors, e.g. various shades of warm, neutral, and cool .Pressing them briefly later quickly launches a previously saved mode. Jumpy transitions of 3 or 7 colors Turning the LED light on/off Play/Pause - stop in dynamic mode light mode Speed adjustment in dynamic mode (faster/slower) Automatic mode (mixed color presentation) Flash mode Smooth transitions of 3 or 7 colors

The remote control allows you to decrease or increase the light brightness. This allows you to achieve both vivid colors and dim, atmosph...

Type: decorative LED strip