OPEL G70 - Diamant Schwarz Met.
✅ Clear Coat Spray 150 ml
Provides good adhesion, gloss and resistance to weather conditions.
• Base: acrylic resin
• Yield for a 400 ml can: from 1.25-1.75 m2
• Non-sticky: from 5 to 10 minutes
• Drying time: from 10 to 20 minutes
• Hard/ready to coat: after approx. 2 hours
• High temperature resistance: up to 110 °C
The drying time depends on, among other things, the ambient temperature, air humidity and the density of the varnish used.
Clear Varnish 150ml
✅ HIGH GLOSS
Quick-drying varnish with a lasting gloss.
1. The surface must be thoroughly cleaned and degreased. Any gaps, scratches, and irregularities should be filled with putty, then the repaired surface should be smoothed with 400-grit dry sandpaper. Remember to protect adjacent elements, preferably with masking tape and foil.
Then apply several thin layers of primer. Allow the primer-coated area to dry (up to approximately 2 hours at 20 degrees Celsius). Then, smooth it with 800-grit wet sandpaper. The repaired element should be cleaned and degreased again.
Please remember to leave a few minutes between each coat.
2. About 30 minutes after applying the last layer of basecoat, apply several layers of clearcoat to the repaired area. Finally, you can remove the masking elements. After 24 hours and complete drying, the surface is ready for polishing.
• Base Coat
The product information is provided to the best of our knowledge. Before use, it is recommended to carry out a spray test to assess the product's compliance with expectations. The decision to continue using the varnish is entirely up to the user.
The seller acts as an intermediary and is not responsible for the final result achieved by the buyer.
החזר על אי אספקה
