Label:Yes
This unit comes with forward and reverse switches, plus a stop position for safe handling.
STMICROELECTRONICS CHIPS
The heat sink spans a broad surface area, handling 60W-150W motors with ease.
PWM SPEED CONTROL
This board runs on PWM technology, giving you a broad speed span and smooth output with solid conversion rates.
FORWARD & REVERSE CONTROL
Built with monolithic capacitors and solid chips, the circuit runs smooth and holds up over time.
Built with STMicroelectronics semiconductors, each unit is checked for voltage, current, and function before shipping. The circuit runs smooth and keeps working over time.
OVERSIZED HEAT SINK
MONOLITHIC CAPACITOR DESIGN
Specification:
Input Voltage: 6.5V-30V DC (Wide Range)
Maximum output power: 150W
Maximum continuous current 6A
PWM Frequency: 16 kHz
PWM Pulse Width Modulation Range: 0%-100%
Size: 73.5*45.5*27mm / 2.9*1.8*1.1in(length * width * height)
Installation hole center distance: 63.5*36.5mm / 2.5*1.4in
Location hole diameter: 3.5mm(0.14in)
Material: PCB
Color: Multicolor
Weight: 69g / 2.4oz
Package list:
1 * Adjustable DC Motor Speed Controller
Note:
1.The actual product color may deviate from the photo due to light.
2.There may be a slight deviation in the measurement of product.
Use and wiring method:
Connect the power cord to ensure that the positive and negative switch is in the middle zero position, connect the DC power supply, ensure that the DC power supply voltage range is greater than 5V, less than 30V, to ensure that the power output power meets the motor working needs. The DC power positive and negative terminals are not reversed, otherwise the speed regulation The device may be damaged.
Connect the motor, the motor line can be positive or negative.
Adjust the switch, the forward and reverse switch is used to control the direction of the motor speed. When the switch is at the zero position, the motor stops.
Potentiometer knob, adjust the potentiometer knob to change the governor output duty cycle, motor speed changes.
Возврат по недоставке
