StudioDaydream Studio Daydream V5 Junction Box with Buffer JCTBx4/MD B.I.

---------------------------------------------------------------------- 【Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction. 【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary. 【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product. 【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer. ----------------------------------------------------------------------

4 line type junction box, essential for building a pedal board High-end model equipped with a buffer in LINE1 Consolidate the input and output of the entire pedal board in one place for neat wiring. Also compatible with connection to amplifier channel switch The DIN connector section supports up to 8 pin connectors, including 5 pin MIDI cables. A 4-line + 1-DIN junction box with a buffer, an essential item for building a pedal board. Prepared as a higher-end model of JCTBx4/MD. Adopts a buffer designed to minimize changes in sound quality, making it compatible with both guitar and bass. You can consolidate the input and output of the entire pedal board in one place, making wiring neat and tidy. It is possible to shorten the setup time before the actual production and prevent unexpected troubles. A buffer installed on the input line converts the signal into a signal that is resistant to noise. Ideal for building the entire system after the junction box with true bypass. LINE-1 is a buffered line that supports monaural signals, and LINE2-3 supports both monaural and stereo, and can also be connected to an amplifier's channel switch. In addition, the buffer is turned on by an internal switch when power is supplied, and is automatically bypassed when power is not supplied, allowing LINE-1 to also function as a passive line. When the buffer is on, there are restrictions on the connection direction for LINE-1 (INPUT-A, INPUT-B) because it passes through the active circuit. One of them is the input of the buffer, and the other is the output), but by having a function to switch the direction of signal flow with a slide switch on the side of the case, it is possible to create a free layout without being restricted by the installation position or direction on the board. ■Specifications overview ・LINE1: ¼ inch phone jack (monaural) Buffer is on when power is supplied (STATUS LED lights up), buffer is bypassed when power is not supplied ・LINE2 to 4: ¼ inch phone jack (compatible with both monaural/stereo) ・DIN jack: 3PIN/5PIN(MIDI)/7PIN/8PIN *Compatible with those with pins arranged in a 45 degree arrangement on concentric circles ・Power supply : 9vDC, center negative (current consumption: approx. 32mA) ・Body size: Width approx. 124mm x Height approx. 72mm x Height approx. 44mm *Including protrusions such as jacks and switches