Features:
- brand new and high quality
- Made of high quality materials,
- Accurate self-calibrating reflectometer design measures forward and reflected signals as well as impedance data
- Display 2x16 with optional backlight
- Precision DDS signal generator (AD9851) as signal source
- USB port to connect to PC for field upgrade software and upload real-time measurement data, buzzer
- Manual control option shows SWR and complex impedance at selected frequency
- Automatic sweep results are displayed as frequencies with lowest SWR and complex impedance
- Battery powered for field use or with external 13.8V wall adapter
- power saving mode
- Multi-point calibration, higher accuracy
- Instrument Capabilities:
- Measure the electrical parameters of the antenna: standing wave ratio, impedance (resistance + reactance), capacitance, inductance
- Measure feed point impedance
- Measure ground loss
- Adjust the antenna tuner and determine the loss
- Measurement of inductors and capacitors
- Measure coaxial transmission lines (SWR, length, velocity factor, approximate Q and loss, resonant frequency and impedance)
- Measure and determine optimal settings for tuning stubs: SWR, approximate Q, resonant frequency, bandwidth, impedance
- Determine the characteristic impedance of the transmission line
- Determine the length of the ¼ and ½ wave phase lines
- Coaxial cable loss
- Determine antenna tuner losses
- measure balun loss
- Measure the inductance Q
- Estimation of quartz crystal parameters
- Measure magnetic ring resonance and SWR
Product parameters:
- Frequency generation and control: 1 - 60 MHz
- Source Impedance: 50 ohms
- Stability: +/- 100 ppm
- Spectral purity: harmonic drop >- TBD dB over 60 MHz
- Step Size: User configurable increments of 100 Hz, 1 kHz, 10 kHz and 100 kHz
- Available measuring ranges:
- VSWR: 1.0 to 9.99
- Impedance: Approx. 5 to 2000 ohms
- RF Output: Adjustable: 2.0 Volts pp (typ)
- Power supply: 3.7v lithium battery (not included)
- External: 12 to 14 VDC, 500 mA
- Controls: Buttons (5): "Mode", "Band", "Configuration", "Scan", "Up", "Down"
- Switch: "Power On"
- Connector:
- RF output: BNC
- USB: Mini-B socket
- External power supply: 2.1mm power (center pin positive)
Package Included:
1PC*Antenna Analyzer (without battery)
Notes:
1. Due to various factors such as display brightness and light brightness, the actual color of the product may be slightly different from the website picture.
2. Please allow a slight deviation between the data and the manual measurement.
החזר על אי אספקה
