Laser class 2 1. Larger area, 255 x 440 mm engraving and cutting area
2. 30W/40W/80W power module, light output 7.5W/10W/15W, focus 0.01mm, support engraving and cutting.
3. Professional, support latest grbl 1.1f firmware, support laserGRBL, benbox, lightburn software.
4. The simplest and portable engraving experience: Supports NEJE series software including NEJE Android app, NEJE Windows software, NEJE Mac software, NEJE Wireless app for iOS, iPadOS, macOS. NEJE scanner app.
5.Safety design. The laser module comes with a protective panel design that blocks over 90% of leaking light. Built-in MEMS roll protection.
6. Quiet use, intelligent drive, can automatically adjust fan speed according to laser temperature.
7. Two ways to adjust focus. You can adjust the focus directly or you can adjust the focus to a fixed position. By using a fixed thickness board and adjusting the focus, engraving and cutting use can be considered at the same time.
8. Supports NEJE 4-pin interface series modules, such as 3500mw, 7W, 20W, 30W, 40W.
9. The product has passed NEJE factory quality control and comes with a 2-year free warranty if there is any quality problem with the product.
laser class 2
-[440 x 255 mm] Just fits on a 600mm wide desktop, the left side of the machine is not limited by the size of the material. Suitable for processing large area materials. Under the protection of MEMS vibration protection sensor, engraving and cutting process can be completed at the same time. The X-axis motion module weighs only 120g and is powered by a 40mm thick high-performance stepper motor, bringing you a faster engraving experience than the gantry structure. 3400 x 5600 pixels, engraving accuracy: 0.075 mm dot pitch, 339 dots/inch. For functional testing of the entire machine, only 4 screws are required to complete the installation.
-[Advanced Laser Module] The laser beam is formed by combining two high-power laser diodes and adopts FAC technology. The minimum focus reaches 0.04x0.04mm (A40640 module). Support NEJE's advanced laser module, built-in high-speed intelligent drive, timely temperature feedback, and intelligently adjust fan heat dissipation. Safe and quiet to use.
-[More materials, clearer] Wood, MDF, leather, paper, cotton, etc. are all supported. 8mm plywood only requires one air-assisted cutting (A40640) and the cut is very clean. You can directly engrave stainless steel, glass, clear acrylic, etc.
- [Portable Professional Control Software]] 32-bit control system, the fastest speed reaches 200,000mm/min, supports LaserGRBL, Lightburn, NEJE software, NEJE APP (Android, iOS, ipadOS, macOS), you can take a photo with your mobile phone or select and modify the image from the album. To quickly complete your work, NEJE provides free software upgrade service.
-[Perfect after-sales service]] The whole machine comes with a 2-year free warranty (laser module: 2 years and 20,000 hours warranty), and vulnerable parts will be shipped worldwide within 24 hours.
החזר על אי אספקה
