Specifications:
Material: Polypropylene (PP)
Color: white
Rated voltage / frequency: 110V/220V/50H2
Cooling capacity: 1100W
Heating capacity: 800W
Rated current: cooling 1.6A / heating 1.7A
Rated power: cooling / heating: 360W
Maximum input current: 2A
Maximum input power: 440W
Maximum working pressure on the suction side/exhaust side: 0.05/1.25MPa
Maximum allowable pressure on low pressure side / high pressure side: 0.05/1.25MPa
The maximum working pressure of the heat exchanger: 1. 78MPA
Circulating air volume: 80m/h
Body size: 460x255x230mm
Noise: ≤38dB(A)
Refrigerant: R134a/120g
Anion function: Yes
Plug: EU Plug, US Plug, AU Plug, UK Plug
Features:
●Free installation, easy to install, convenient to use
●Fast cooling
●USB fast charge
●Independent dehumidification
●Intelligent timing
● night lighting
●Small, easy to carry
●Touch remote control
●Low noise, peace of mind and sleep
●Low consumption, power saving, environmental protection
Application: Dormitory / Outdoor Sentry / Office / Public Dormitory
How to use (Instructions)
● Plug the plug into the standard jack, and when the “--” in the middle of the indicator light is on, press the power switch to start. Press the “Time 1” and “Time +” keys to set the temperature you want. The temperature can be cycled from 17°C to 35°C. The digital flashes. After 3 seconds, the computer automatically records and the system defaults after booting.
● Press the time button to set the working time of the machine. From 1 to 12 hours, it can be set cyclically. Each time you press it, it will increase by one hour. When the machine works until the time you set, it will stop automatically. The system defaults to 9 hours.
● It is best not to use the machine for more than 10 hours per time. Please let the machine have a certain rest time. When the temperature is too high, the compressor will take a break and then start automatically. This is normal. There is no special situation. Please use the machine with mosquito nets!
● Check if the water outlet pipe is blocked by debris. If it is blocked, please clear the debris to ensure that the condensed water inside can flow smoothly. In addition, put only the bucket under the tube and catch the condensed water. When the water surface is close to the end of the water outlet, please dump it in time.
● Exhaust pipe installation: Install the joint of the exhaust pipe at the square port of the air outlet. The heat pipe should be smooth upwards. Do not deflect or turn the 90 degree sharp bend to facilitate the discharge of hot air.
Warning: The hot air outlet of the main unit is ≥0.6 meters away from the wall.
Package included:
1 x Air conditioner
1 x Remote control
1 x Copper wire plug
2 x Windshields
החזר על אי אספקה
