Description:
Working voltage: AC 220V
Regulation voltage: AC 10-220V
Max load power: 4000W (resistive load)
Efficiency: 90%
Application : Electric furnace, water heater, lamps, small motor, electric iron etc.
Dimensions: 85 x 55 x 38MM
Product type: Engines & Speed Controllers
Features:
You must connect to the load before the regulator.
SCR is mainly used for resistive loads (incandescent electric wire, etc.), most of the single-phase AC motor can, but can not guarantee, other types of loads buyer to confirm their own. Fuse is not a panacea, there is reaction time, if the current is too large, in addition to burn the fuse, the module may also be burned.
Attention to fitting plastic cover due to the installation of the housing, can not be completely open, screwdriver to tighten the side with the point, the other to be careful when opened, excessive force easily snapping the lid, express transportation may also crushed for wearing parts, but It does not affect the module.
Package included:
1x Variable Voltage Regulator
Note:
Please allow 1-2cm errors due to manual measurement.
Because of the different display of each computer, the pictures may not reflect the actual color of the item.
This module is AC voltage 220V input, AC output, it can only be stepped down, and the voltage can be adjusted only when connected to a load. It is useless to connect a multimeter with no load.
It is not a transformer and cannot be connected to a DC load. Please read the following instructions carefully before shooting!
Maximum power: 4000W (resistive load limit power), the power should be reduced for a long time. (Recommended load within 1600W power).
החזר על אי אספקה
