Product Introduction
Product Introduction: Enjoy drift driving in small spaces with this four-wheel drive chassis and pre-installed drift tires! The Mini-Z AWD series, combined with the Syncro KT-531P transmitter. We wanted more drivers to experience the thrill of Mini-Z AWD driving. To fulfill that desire, the "Mini-Z AWD Ready Set" was created. The MA-020 series chassis incorporates a revised steering control program and features a VCS (Variable Camber Suspension) at the front, optimizing camber changes with suspension stroke. It's compatible with a dedicated gyro (sold separately: part number MZW446), equipped with a dedicated space and gyro adjustment volume. The gyro's effectiveness can be adjusted within the chassis itself, reflecting attitude changes in steering correction, providing a safe driving experience for beginners and support for experts to showcase their skills. Furthermore, it features a full bearing specification with 14 bearings. This highly efficient and durable chassis is available at an affordable price. This set is a ready-to-run set featuring a body with the scale realism unique to Mini-Z and a 2.4GHz "Syncro KT-531P" radio control system that eliminates the need for band management. It comes standard with drift tires, allowing you to enjoy thrilling drift driving immediately after simply inserting batteries. Of course, it is compatible with many of Mini-Z's ASC bodies (additional parts may be required depending on the car model). Experience the driving feel that only an AWD chassis can provide with the "Mini-Z AWD". *The separately sold LED light unit set (No. MZW429R) can be installed on the Toyota Corolla Levin AE86. A renewed version of the AWD sports chassis based on the MA-020 series chassis. A dedicated circuit board with a revised steering control program. A volume control is installed on the chassis itself to adjust the gyro's effectiveness. Drift tires are standard equipment. A ready-to-run set that runs immediately after inserting batteries. Uses a 2.4GHz Syncro KT-531P transmitter that eliminates the need for band management. Factory-finished body with the same finish as the display model. It employs the "VCS" front suspension, which brings out camber changes in accordance with the suspension stroke. The coil springs of the front suspension can be easily replaced without tools. A wide range of optional parts can be attached. Note: Optional ICS cannot be used. Also, it is designed exclusively for the KT-531P transmitter and is not compatible with KT-18, KT19, EX-5UR, ASF, EX-6, or EX-6R transmitters. In addition, the gyro unit (sold separately: part number MZW446) is only compatible with the dedicated product. [Technical Data] Overall length 164.5mm. Overall width 68.0mm. Overall height 53.0mm. Wheelbase 94.0mm (L). Tread F: 56.5mm R: 56.5mm. Chassis used MA-020-N. Front wheel offset Narrow ±0.0mm. Rear wheel offset Narrow ±0.0mm. Transmitter Syncro KT-531P. [Ready-to-Run Set Contents] Fully assembled chassis with R/C unit installed. Factory-painted and marked plastic body. Syncro KT-531P 2.4GHz transmitter. Mini pylons. Pinion gears (15T, 17T, 19T, 21T). Spur gears (27T, 29T, 31T). Spare nuts. Wheel wrench. Pinion removal tool. [Items Required for Operation (Not Included)] 4 AAA batteries for the transmitter. 4 AAA batteries (alkaline or nickel-metal hydride) for the vehicle. *Batteries are required to operate this product, but they are not included. Please purchase them separately before operation. *This product does not use fuel. *Fuel is not included with this product. *Batteries, chargers, paint, adhesive, oil, and grease are not included with this product. Safety Warning: Please operate with caution and pay attention to your surroundings.
Safety Warning
Please operate with caution and pay attention to your surroundings.
With its four-wheel drive chassis and pre-installed drift tires, you can enjoy drift driving even in small spaces! The Mini-Z AWD series, combined with the Syncro KT-531P transmitter.
A renewed version of the AWD sports chassis based on the MA-020 series chassis. Features a dedicated circuit board with revised steering control program. Equipped with a volume control for adjusting gyro effectiveness on the chassis alone. Standard drift tires included.
Ready-to-run set – simply insert batteries and it's ready to go. Uses a 2.4GHz Syncro KT-531P transmitter that requires no band management. Factory-finished body with the same finish as the display model.
Features the "VCS" front suspension, which brings out camber changes in accordance with the suspension stroke.
Front suspension coil spring replacement is easy and requires no tools. A wide range of optional parts are available.
החזר על אי אספקה
