Specification:
Product Category: Fingerprint Lock
Material: ABS+stainless steel
Colour: Black
Power: Install 4 AAA (size 7) batteries (not included)
Fingerprint: 10 fingerprints can be registered at one time
Fingerprint setting:
1, short press the reset hole once with the registration pin, the blue light will be on for a long time, put your finger on the fingerprint identification within 3 seconds, the blue light will flash to indicate successful identification, the same fingerprint needs to be identified 5 times continuously, the blue light will be on for 2 seconds to indicate successful registration. The red light blinks to indicate registration failure. Please re-register and repeat the above operation.
2, For the second fingerprint entry, please repeat the steps in step 1
3、Registration pin long press the reset hole for more than 5 seconds, while the blue light blinks 5 times, it means all the fingerprints recorded have been cleared.
How to unlock
When recognizing the fingerprint, see the blue light on and feel the vibration and sound alert, which means the fingerprint recognition is successful and can be unlocked
When the battery is dead
1. When the battery voltage is low, there will be a continuous ticking sound when unlocking, indicating that the voltage is too low to replace the battery
2. When the lock body battery voltage is insufficient, you can charge through the USB interface to open the door in case of emergency
Packing list:
1*Fingerprint panel
1*Lock body
1*Installation accessories
1*Mounting screw
1*Reset pin
2*Install the positioning piece
Note:
-Due to different producing batches, product details might be a little different. If you minding the difference, please buy it carefully.
-Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding.
החזר על אי אספקה
