A new rechargeable screwdriver with dual electric and manual drive that feels like a hand screwdriver.
[Uses]
Tightening and loosening various machine screws and wood screws.
[Features]
- Equipped with an auto-stop function that senses load and automatically stops the screwdriver. The load detection level can be adjusted to three levels (forward rotation only). Adjust the timing of the auto-stop to suit the task and materials, reducing overtightening.
- Equipped with a generous 1500mAh battery and a brake function that instantly stops rotation when the switch is released.
- With the push of a button, it can be used as both an electric screwdriver and a hand screwdriver. Includes a shaft lock function.
- Equipped with an LED work light that illuminates the work area and maintains its illumination for approximately 3 seconds after the switch is released.
- The small, slender, streamlined body features a comfortable, non-slip rubber grip, allowing you to hold the tool securely in both electric and manual modes.
[Caution]
*Please read the instruction manual before use.
*Do not apply a load that could cause the drive shaft to become stuck while the switch is on.
*Doing so may cause a malfunction.
*A charging adapter is not included with this product.
*Please purchase and use a commercially available USB/AC adapter separately for charging.
*Do not rotate the unit with excessive force when using it manually (maximum 7.0 Nm).
*Doing so may cause a malfunction.
*The estimated number of charge/discharge cycles is approximately 500.
*When the battery deteriorates and its storage capacity decreases, purchase a new product.
*The battery cannot be replaced.
*Do not use or charge in the rain.
*The auto-stop adjustment function is not a torque adjustment function.
*It adjusts the load at which rotation will stop.
*As a result, the tightening torque of this unit when used in electric mode remains 2.5 Nm. Therefore, even if the auto-stop select switch is set to 2 or 3, you can tighten up to 2.5 Nm by repeatedly rotating and stopping.
Motor Voltage: 3.7V, Battery: 1500mAh Lithium-ion, Charging Time: 150 minutes via USB charging (USB A + Micro B)
No-load Speed: 300 min-1 (with brake), Maximum Tightening Torque: (Electric) 2.5 Nm, (Manual) 7.0 Nm, Torque with Auto-Stop Activated (Forward Rotation Only): 1.0 Nm, 1.5 Nm, 2.5 Nm
Chuck: 6.35 mm Hex Bit Sleeve Chuck, Body Material: PA6GF30 + TPE + ABS
Tightening Capacity: Machine Screw Diameter 5 mm, Wood Screw Diameter 3.5 mm x 20 mm (Wood screws cannot be fully tightened using electric mode alone; manual tightening is required)
Standard Accessories: USB Cord (No Communication Function), 2 x Flathead 5.5 mm x 110 mm Bit
החזר על אי אספקה
