Product Selling Point:
1.Widely used
2.Easy to install
3.Safe and power-saving, free from external influences such as sound and material.
4.Strong anti-interference
5.Sensitive and high sensitivity
Product Overview:
When someone walks into the sensor and meets the lighting demand, the microwave switch automatically opens, the load electrical appliance begins to work, and the delay system is started, as long as the human body does not leave the induction area, the load electrical appliance will continue to work. When the human body leaves the sensing area, the sensor begins to calculate the delay, the delay ends, the sensor switch automatically closes, and the load electrical appliance stops working. Truly do, safe, convenient intelligent, energy saving.
Product Features:
1. Sensitive sensing, accurate identification of the movement of organisms and non-organisms, so that the error rate is very low.
2. Strong anti-interference: 5.8GHz operating frequency, small external natural influence factors, stable and reliable performance.
3. Automatic metering: automatically identify the strength of the ambient light, and light up when the lighting needs are set and someone is present. Otherwise it won't light up.
4. Automatic induction: automatically turn on the light after sensing the person, the light comes on and the light goes off, safe and power-saving, not affected by sound, things and other external influences.
Technical parameters:
Operating voltage: AC85-250V
Standby power consumption: 0.9W
Transmit power: < 10mA
Operating frequency: 5.8GHz
Sensing distance: 2-16m (adjustable)
Working delay: 8 seconds to 12 minutes adjustable
Light control illuminance: 2-200LUX adjustable
Load power: 800W (resistive load) 200W(capacitive load)
Four Points For Attention:
1. Disconnect the power supply during installation to avoid danger
2. The product is not waterproof, please pay attention to moisture and waterproof.
3. The microwave induction Angle is 360 degrees, please pay attention to the installation method.
4. Product internal high voltage, non-professionals do not disassemble, otherwise the consequences.
Induction illuminance can be adjusted, induction distance can be adjusted, delay can be adjusted.
Induction Angle: built-in antenna surface 360 degrees;
Can be applied to any load: monitoring, alarm equipment, LED lights, fluorescent lamps, incandescent lamps, exhaust fans, solenoid valves, etc. It can be installed in all lamps to make induction lights, and can also be induced through the lampshade.
Humanized extended induction design: If someone is continuously active in the induction area, the induction signal will automatically change to extend the induction time, and will not be re-induced after the light is extinguished.
The wiring method is more scientific than other products. We have designed 2 inlet holes and 2 outlet holes. Easy wiring. And a pluggable terminal is adopted. Easy and quick installation.
Package Included:
1Pc Microwave Radar Induction Switch
Notes:
Due to differences in lighting and screen settings, the color of this item may vary slightly from the picture.
Please allow slight size differences due to different manual measurements.
The merchant warrants that their products comply with all applicable laws, and are offered only if they comply with Joom's policies and EU Product Safety and Compliance laws.
החזר על אי אספקה
