MCU FT232H high-speed multifunctional module USB to JTAG UART/FIFO SPI/I2C

modname=ckeditorTypical Applications? Single chip USB to UART (RS232, RS422 or RS485)? USB to FIFO? USB to FT1248? USB to JTAG? USB to SPI? USB to I2C? USB to Bit-Bang? USB to Fast Serial Interface? USB to CPU target interface (as memory)CJMCU-FT232H is a single channel USB 2.0 Hi-Speed (480Mb/s) to UART/FIFO IC. It has the capability of being configured in a variety of industry standard serial or parallel interfaces. The FT232H has the following advanced features:? Single channel USB to serial / parallel ports with a variety of configurations.? Entire USB protocol handled on the chip. No USB specific firmware programming required.? USB 2.0 Hi-Speed (480Mbits/Second) and Full Speed (12Mbits/Second) compatible.? Multi-Protocol Synchronous Serial Engine (MPSSE) to simplify synchronous serial protocol (USB to JTAG, I2C, SPI (MASTER) or bit-bang) design.? UART transfer data rate up to 12Mbaud. (RS232 Data Rate limited by external level shifter).? USB to asynchronous 245 FIFO mode for transfer data rate up to 8 Mbyte/Sec.? USB to synchronous 245 parallel FIFO mode for transfers upto 40 Mbytes/Sec? Supports a proprietary half duplex FT1248 interface with a configurable width, bi-directional data bus (1, 2, 4 or 8 bits wide).? CPU-style FIFO interface mode simplifies CPU interface design.? Fast serial interface option.? FTDI’s royalty-free Virtual Com Port (VCP) and Direct (D2XX) drivers eliminate the requirement for USB driver development in most cases.? Adjustable receive buffer timeout.