Dw-15 50X50 Leveling Spacer

Plastic spacers Thickness: 15 mm, 50 pcs Made of polyethylene, they come in different colors depending on thickness. These spacers are used for leveling and compensating for uneven surfaces. Most important parameters Model: DW-15 Thickness: 15 mm Size: 50x50 mm Packaging: 50 pcs. Maximum pressure force on the entire surface of the pad: 10 kN Maximum pressure weight on the entire surface of the washer: approx. 1000 kg Compressive strength: 4 MPa , 400 N/cm2 Material: polyethylene Original product of a renowned brand Klimas Wkręt-Met® Features and application 1. They have 3 holes They can be attached using connectors of various diameters (6, 8, 10 mm). 2. Even surface They are used to level out unevenness in the substrate between the substrate and the starter strip. Washers allow for a level surface for wall insulation. 3. Indispensable during work Designed for, among other things, leveling starter strips for insulation systems, leveling battens, and leveling joists. Installation method Select the thickness of the washer to match the gap between the strip and the substrate. Slide the washer under the strip and set the appropriate hole for the connector diameter. Install the connector in the substrate. It is not recommended to install the connectors without checking the gaps under the strips; this may cause the strips or profiles to break on uneven surfaces. KLIMAS products - the most common choice of professionals You will find washers in other thicknesses in our other auctions. To facilitate work, the washers are marked with different colors to easily find the thickness we are interested in. brown - 2mm red - 3mm green - 4mm yellow - 5mm blue - 8mm black - 10mm white - 15mm