Function : Decorative
Model Number : MY0101CS
Surface Treatment : Stained
Type : Metallized Films
Feature : Self-Adhesive
Material : PET
Origin : Mainland China
Finished Size : See the detailed description, for reference only
Scope of Application : Car glass, window glass, door glass and etc
: Support (more discount), please contact customer service
Car styling sticker
Our Packing (Default)
Our Packing Method: The stickers are put into Bubble envelope bag.
Remark: This envelope bag has a size of 18cm*23cm (width*height).
Note: For different size of stickers, it might use the different size of envelope bag.
Warm Tip: When receiving the packages, if the stickers is damaged in transit, please raise a dispute attaching some real pos to ask a refund, the reason of dispute is "Product arrived damaged", not "xx are not as described" or "Defective". And, if just because of this, it is hopeful not to leave us a negative feedback (below 3 stars).
Like this, as seller, we can do a claim on the logistics company.
And, it isn't required to return the goods to the seller.
Thanks a lot for your understand and support!
How To Use The Car Sticker
Dry sticking method for small area car stickers:
Attention: Before pasting, please rub the stickers to make sure the transfer films is adhered closely onto the car stickers!
1st, Clean and dry the desired area, to make sure that the stickers could adhered tightly onto clean smooth surfaces;
2nd, Remove slowly the wax backing paper, in order that the stickers is adhered to the transparent transfer films tightly;
3rd, Postioning the stickers carefully to the desired area;
4th, Rub the stickers from one side to the other, to eliminate any air bubbles;
If pasting on the junction position, can use a art knife to gash the stickers along the gap;
And then use a small scraper to rub the decals, to make sure that the entire sticker is fully adhered to the surface;
5th, Remove the transferred film, to make sure that no part of the stickers remains on the transferred film;
6th, Check for air bubbles, in most cases air bubbles may be worked to the edge of the stickers;
If has, a pin hole will allow the air out and become virtually invisible.
Finally, your stickers is now worry free!
Please check the below pictures shown, only for reference!
Size Control
If you want to know the actual size of the car stickers, you can refer to the size of any object in hand, a s shown in the pictures below:
1> A cigarette case with flip cover; 2> A4 paper; 3> The blank space key of desktop computer standard keyboard.
FAQ
Q: What features of the material of car sticker?
A: These are DIE CUT decals, there is no background. If there is a background color in the picture, it is used only as an example.
It is transparent!
Vinyl Decals comes in 3 layers:
Top layer is a transparent transfer film (holding the decal or stickers together until it is applied);
Middle layer is the actual decal or stickers (It is sandwiched between the Transfer Film and the Wax Backing Paper);
Bottom layer is the wax backing paper (Protecting the adhesive until the decal is ready to be applied);
After sticking, do not wash it within 24 hours.
It is waterproof, easy to remove, no injury to the surface of your cars!
For reflective stickers, for sticking on the car too long, might not easy to remove, it is advised to heat it to clean or go to the car wash shop!
Q: Can the wall stickers be reused?
A: Yes. But not recommended.
Q: Size error and color difference?
A: The actual size of the goods received may have an error of 1-3 MM. This is a normal phenomenon.
The color difference may be caused by some reasons such as color reflection in the monitor, lighting, background etc. The color is subject to the real goods received. If just not like the color of the real goods received, please don't leave a negative feedback of "Bad Quality".
If mind, please be cautious to buy!
Q: Why is it that the wall stickers attached will peel off automatically slowly soon after, is it a quality problem?
A: The wall stickers are mass-produced and have passed factory inspected, so it is not normal for several pieces of wall stickers to be poorly attached.
The possible influencing factors are as follows:
1/ Just coated walls with new paint, uneven wall surfaces, unclean surfaces (with dust or powder), wet wall surfaces;
2/ Low temperature environment. In cold room, the adhesive might frozen, reduced the adhesion of wall stickers;
3/ The stickers didn't stick onto the wall surface tightly, leaving gaps.
As the above, only for reference!
Pasting Matters Needing Attention
After received, please release it and keep flattening 1-2 days, until the stickers is restored flattening, and then paste, to avoid curling edge peeling;
Make sure that the pasting surface must be smooth flat clean and dry;
Before pasting, it is required to do testing on the surface that want to paste, to check over whether be applicable to paste this wall stickers;
When pasting a large area decal, pasting onto the wall surface while peel off the decal slowly to start from the edge corners;
If any bubbles, use a hard card to squeeze out, or a sharp small needle to puncture, and then press flat.
As the above, only for reference!
החזר על אי אספקה
